[cisco-voip] Antw: Re: CFA to predefined number

[Robert Schuknecht]

Hi Wes and everyone,

unfortunately i don´t know how to write AXL-Scripts. Where can i find some good information to start learning how to create AXL Scripts. Especially for Callmanager 5.X/6.X and above?

/Robert

>>> Wes Sisk<wsisk at cisco.com> 16.04.2008 16:20 >>>
Pretty easy to write.  Architecture overview:

1) configure phone service with #DEVICENAME# so phone will pass its device name when service is accessed
2) assign the the service to a line button
3) on the server that hosts the service perform axl update for the specific devicename

/Wes

Ed Leatherman wrote: 

This is one feature we still miss from the old centrex phones, was called call forward variable. Once it was set the users could just hit the button to toggle the forwarding. Not a big deal but they really liked the convenience.
On the plus side though we don't have any service calls now for people that forget how to re-program it.

On Wed, Apr 16, 2008 at 7:35 AM, Lelio Fulgenzi <lelio at uoguelph.ca> wrote:


The only alternative is to create a new VM profile and pilot for the user
and have them press two buttons, fwd and messages.

Chances are they don't forward to VM as often as they want to forward to
this other destination.

Not scalable though.

--------------------------------------------------------------------------------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
"Bad grammar makes me [sic]" - Tshirt

----- Original Message -----
From: "Robert Schuknecht" <rschuknecht at gmx.de>
To: "Cisco-VoIP PuckNetherNet" <cisco-voip at puck.nether.net>;
<lelio at uoguelph.ca>; "Robert Schuknecht" <rschuknecht at gmx.de>
Sent: Wednesday, April 16, 2008 7:29 AM
Subject: Antw: Re: [cisco-voip] CFA to predefined number


> Hi Lelio,
>
> i had the same idea but it did not work. after i pressed the CFA Softkey i
> heard the dialtone, but nothing happend.
>
>
>>>> Lelio Fulgenzi<lelio at uoguelph.ca> schrieb am Mittwoch, 16. April 2008
>>>> um 12:46
> in Nachricht b2fb97e5877855e52bcf79e9cea16ec7:
>> Try creating a blank translation to the destination - put it in a
>> partition
>> that is the only partition in a specific CSS then assign this CSS to the
>> forwarding search space.
>>
>> It might work.
>>
>> Basically the same steps as creating a plar.
>>
>> --------------------------------------------------------------------------------
>> Lelio Fulgenzi, B.A.
>> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
>> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
>> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>> "Bad grammar makes me [sic]" - Tshirt
>>
>> ----- Original Message -----
>> From: "Robert Schuknecht" <rschuknecht at gmx.de>
>> To: "Cisco-VoIP PuckNetherNet" <cisco-voip at puck.nether.net>
>> Sent: Wednesday, April 16, 2008 4:46 AM
>> Subject: [cisco-voip] CFA to predefined number
>>
>>
>>> Hi List,
>>>
>>> is it possible to restrict CallForwardAll to an predefined number, so
>>> the
>>> user has only to press the CFA Softkey and all calls are forwarded to an
>>> predefined number?
>>>
>>> Any hints and ideas are welcome!
>>>
>>> /Robert
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> cisco-voip mailing list
>>> cisco-voip at puck.nether.net 
>>> https://puck.nether.net/mailman/listinfo/cisco-voip 
>>>
>
>

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net 
https://puck.nether.net/mailman/listinfo/cisco-voip 




-- 
Ed Leatherman
Senior Voice Engineer
West Virginia University
Telecommunications and Network Operations _______________________________________________
cisco-voip mailing listcisco-voip at puck.nether.nethttps://puck.nether.net/mailman/listinfo/cisco-voip