[cisco-voip] ucm 5.1 to 6.1 upgrade

[Eric Pedersen]

Thanks everyone.  I'm pretty sure I've got the wrong DVD in my upgrade
kit.

 

________________________________

From: Wes Sisk [mailto:wsisk at cisco.com] 
Sent: April 16, 2008 1:33 PM
To: Eric Pedersen
Cc: Jonathan Charles; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] ucm 5.1 to 6.1 upgrade

 

When you order the upgrade kit you receive a disk that contains a signed
upgrade file *tar.gz.sgn
Neither the *.sgn.iso file from Cisco.com nor the 6.1 new install disk
will work for upgrade from CM5.x.

Well, the new install will if you wipe the hard drive and start over
from scratch ;)

/Wes

Eric Pedersen wrote: 

Do you mean point to the 6.1 DVD from the iptplatform software upgrade
web interface the same as if I was patching callmanager 5.1?  I tried
pointing CM at my 6.1 DVD and I get:
 
The directory was located and searched but no valid options or upgrades
were available. Note, a machine cannot be downgraded so option and
upgrade files for previous releases were ignored.
 
The 6.1 DVD I have is a bootable linux DVD with the 6.1 installer on it.
There is no signed patch file that can be applied to callmanager 5.1.
 
Thanks,
Eric
 
-----Original Message-----
From: Jonathan Charles [mailto:jonvoip at gmail.com] 
Sent: April 15, 2008 12:11 PM
To: Eric Pedersen
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] ucm 5.1 to 6.1 upgrade
 
You needed to order the upgrade kit to get the PAK for the license
upgrade, cuz you now need a CCM feature license.
 
Just put the disc into the DVD drive and point the upgrade to the
drive and go... do the pub first, load your license, then do the
sub...
 
 
 
Jonathan
 
On Tue, Apr 15, 2008 at 1:04 PM, Eric Pedersen <eric.pedersen at sait.ca>
<mailto:eric.pedersen at sait.ca> 
wrote:
  

	 
	 
	 
	I'm confused about the UCM 5.1 to 6.1 upgrade.  The cisco docs I
found
	    

said
  

	I need to order a UCM 6.1 DVD for this, which should contain a
	ucm...tar.gz.sgn file.  I ordered an upgrade kit and a box came
with
	    

the label
  

	"SW Upgrade CM 5.1/5.1 to 6.1 for Cisco Smartnet?" (not sure why
Cisco
	    

puts
  

	a ?).  The DVD inside says "Cisco Unified Communications Manager
6.1,
	Includes CUCM 6.1 (Install and Upgrade from 4.1/4.2)".  Is this
going
	    

to
  

	work for 5.1, or was I sent the wrong DVD?  I did not see a
tar.gz.sgn
	    

file
  

	on the DVD.
	 
	 
	 
	Thanks,
	 
	Eric
	_______________________________________________
	 cisco-voip mailing list
	 cisco-voip at puck.nether.net
	 https://puck.nether.net/mailman/listinfo/cisco-voip
	 
	 
	    

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080416/9a994f82/attachment-0001.html