[cisco-voip] DMA 4.2 to 6.x staging !!!

[Djokic Sinisa]

hi crew..

 

i'm staging for migration from CCM 4.2 to UCCM 6.x cluster and i did DMA
export..

so during UCCM 6.0 install when it asked me for a hostname i tried to enter
the old one but it didn't excepted it obviously the old hostname has
underscores in it..

it's like COMPANY_CCM_X..

so i entered new one..

is that going to cause problems?..beacuse of the DMA export fiule containg
old hostname..IP address remained the same..

i'm in the middle of it so i don't have any results yet..

if it would cause problems what's the soluton..

i do sincerely hope it;s not the fresh install..

 

 

thanx..

 

regards..

 

 

Sinisa Djokic 

System Engineer
CCNP,CCDA,CQS-CWLDS,CS-CIPTDS,CS-CIPCCES Cisco Certified

 




  

MDS Informaticki inzenjering
Bul. Arsenija Carnojevica 170
11070 Novi Beograd, Serbia
Tel: +381 11 2015 200, 2015 273
Fax: +381 11 3194 954
www.mds.rs
sdjokic at mds.rs

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080417/12faf0fd/attachment.html 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/gif
Size: 3486 bytes
Desc: not available
Url : https://puck.nether.net/pipermail/cisco-voip/attachments/20080417/12faf0fd/attachment.gif