[cisco-voip] DMA 4.2 to 6.x staging !!!

[Jonathan Charles]

Please do not say that you had an underscore in your old hostname...

Because if you do, you cannot run DMA.

We ran into this a few months ago on a 4.1 - 6.0 upgrade and we ended
up having to export everything via BAT and reimporting... TAC said an
underscore means DMA cannot be used.



Jonathan



On Thu, Apr 17, 2008 at 7:51 AM, Djokic Sinisa <sdjokic at mds.rs> wrote:
>
>
>
>
> hi crew..
>
>
>
> i'm staging for migration from CCM 4.2 to UCCM 6.x cluster and i did DMA
> export..
>
> so during UCCM 6.0 install when it asked me for a hostname i tried to enter
> the old one but it didn't excepted it obviously the old hostname has
> underscores in it..
>
> it's like COMPANY_CCM_X..
>
> so i entered new one..
>
> is that going to cause problems?..beacuse of the DMA export fiule containg
> old hostname..IP address remained the same..
>
> i'm in the middle of it so i don't have any results yet..
>
> if it would cause problems what's the soluton..
>
> i do sincerely hope it;s not the fresh install..
>
>
>
>
>
> thanx..
>
>
>
> regards..
>
>
>
>
>
> Sinisa Djokic
>
> System Engineer
>  CCNP,CCDA,CQS-CWLDS,CS-CIPTDS,CS-CIPCCES Cisco Certified
>
>
>
>
>
>
>
>
> MDS Informaticki inzenjering
>  Bul. Arsenija Carnojevica 170
>  11070 Novi Beograd, Serbia
>  Tel: +381 11 2015 200, 2015 273
>  Fax: +381 11 3194 954
>  www.mds.rs
>  sdjokic at mds.rs
>
>
> _______________________________________________
>  cisco-voip mailing list
>  cisco-voip at puck.nether.net
>  https://puck.nether.net/mailman/listinfo/cisco-voip
>
>