[cisco-voip] DMA 4.2 to 6.x staging !!!

[Jonathan Charles]

Gee, at least they weren't dicks about it...



Jonathan

On Thu, Apr 17, 2008 at 9:30 AM, Jason Aarons (US)
<jason.aarons at us.didata.com> wrote:
>
>
>
>
> I opened a tac case and was told it was by-design (my hostname started with
> a number which failed)  thus they wouldn't file a bug id even though the
> Help says any alphanumeric character is acceptable. They sent me a link to
> the original dns rfc.
>
>
>
>  ________________________________
>
>
> From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Voice Noob
>
>  Sent: Thursday, April 17, 2008 9:52 AM
>  To: Jonathan Charles
>
> Cc: cisco-voip at puck.nether.net
>  Subject: Re: [cisco-voip] DMA 4.2 to 6.x staging !!!
>
>
>
>
>
> Is this _ problem documented somewhere on Cisco.com? I find it hard to
> accept that you could not use an _ for the DMA export.
>
>
> On Thu, Apr 17, 2008 at 8:34 AM, Jonathan Charles <jonvoip at gmail.com> wrote:
>
> Please do not say that you had an underscore in your old hostname...
>
>  Because if you do, you cannot run DMA.
>
>  We ran into this a few months ago on a 4.1 - 6.0 upgrade and we ended
>  up having to export everything via BAT and reimporting... TAC said an
>  underscore means DMA cannot be used.
>
>
>
>  Jonathan
>
>
>
>
>
>
>  On Thu, Apr 17, 2008 at 7:51 AM, Djokic Sinisa <sdjokic at mds.rs> wrote:
>  >
>  >
>  >
>  >
>  > hi crew..
>  >
>  >
>  >
>  > i'm staging for migration from CCM 4.2 to UCCM 6.x cluster and i did DMA
>  > export..
>  >
>  > so during UCCM 6.0 install when it asked me for a hostname i tried to
> enter
>  > the old one but it didn't excepted it obviously the old hostname has
>  > underscores in it..
>  >
>  > it's like COMPANY_CCM_X..
>  >
>  > so i entered new one..
>  >
>  > is that going to cause problems?..beacuse of the DMA export fiule
> containg
>  > old hostname..IP address remained the same..
>  >
>  > i'm in the middle of it so i don't have any results yet..
>  >
>  > if it would cause problems what's the soluton..
>  >
>  > i do sincerely hope it;s not the fresh install..
>  >
>  >
>  >
>  >
>  >
>  > thanx..
>  >
>  >
>  >
>  > regards..
>  >
>  >
>  >
>  >
>  >
>  > Sinisa Djokic
>  >
>  > System Engineer
>  >  CCNP,CCDA,CQS-CWLDS,CS-CIPTDS,CS-CIPCCES Cisco Certified
>  >
>  >
>  >
>  >
>  >
>  >
>  >
>  >
>  > MDS Informaticki inzenjering
>  >  Bul. Arsenija Carnojevica 170
>  >  11070 Novi Beograd, Serbia
>  >  Tel: +381 11 2015 200, 2015 273
>  >  Fax: +381 11 3194 954
>  >  www.mds.rs
>  >  sdjokic at mds.rs
>  >
>  >
>
>
>
> > _______________________________________________
>  >  cisco-voip mailing list
>  >  cisco-voip at puck.nether.net
>  >  https://puck.nether.net/mailman/listinfo/cisco-voip
>  >
>  >
>  _______________________________________________
>  cisco-voip mailing list
>  cisco-voip at puck.nether.net
>  https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
>
>
>
> ________________________________
>
>
>  Disclaimer: This e-mail communication and any attachments may contain
> confidential and privileged information and is for use by the designated
> addressee(s) named above only. If you are not the intended addressee, you
> are hereby notified that you have received this communication in error and
> that any use or reproduction of this email or its contents is strictly
> prohibited and may be unlawful. If you have received this communication in
> error, please notify us immediately by replying to this message and deleting
> it from your computer. Thank you.