[cisco-voip] Bulk MWI Enable

[Dennis Heim]

Yeah. The solution was to run Dbwalker, apparently if you bulk import users without the MWI checkbox, it does not create the entry in the notificationMWI table. When bulk edit goes to update the entry it does not find it, but does not report an error back, and consequently does not check the box and add the MWI extension.

Dennis Heim
Network Voice Engineer
Berbee
11711 N. Meridian Street, Suite 225
Carmel, IN  46032

317.569.4255 Office
317.569.4201 Fax
317.694.6070 Cell
dennis.heim at cdw.com
www.berbee.com


-----Original Message-----
From: Pat Hayes [mailto:pat-cv at wcyv.com] 
Sent: Monday, April 21, 2008 2:35 PM
To: Dennis Heim
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Bulk MWI Enable

You mean like the Bulk Edit tool? :-) It's got an option to 
enable/disable MWI and can, of course, be run against groups of users.

http://www.ciscounitytools.com/App_BulkEditUtility_40.htm

-------- Original Message  --------
From: "Dennis Heim" <Dennis.Heim at cdw.com>
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Bulk MWI Enable
Date: 4/21/2008 2:17 PM

> Is it possible to bulk enable subscribers for MWI? I have about 1,000 
> subscribers that I need to add the check mark next to "Use MWI for 
> message notification."
> 
>  
> 
> Thanks,
> 
>  
> 
> Dennis Heim
> Network Voice Engineer
> Berbee
> 11711 N. Meridian Street, Suite 225
> Carmel, IN  46032
> 
> 317.569.4255 Office
> 317.569.4201 Fax
> 317.694.6070 Cell
> 
> dennis.heim at cdw.com <mailto:dennis.heim at cdw.com>
> www.berbee.com <http://www.berbee.com/>
> 
>  
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip