[cisco-voip] CCM Express Ext. to PSTN and PSTN to Ext.
Mark Mclean
m.mclean08 at gmail.com
Tue Apr 22 09:47:30 EDT 2008
Thanks for you prompt support...
On Tue, Apr 22, 2008 at 3:43 PM, Ryan West <rwest at zyedge.com> wrote:
> Yes.
>
>
>
> -ryan
>
>
>
> *From:* Mark Mclean [mailto:m.mclean08 at gmail.com]
> *Sent:* Tuesday, April 22, 2008 9:37 AM
>
> *To:* Ryan West
> *Cc:* cisco-voip at puck.nether.net
> *Subject:* Re: [cisco-voip] CCM Express Ext. to PSTN and PSTN to Ext.
>
>
>
> Oh, i got you, so it will be like this:
>
>
>
> !
> voice translation-rule 2
> rule 1 /^100/ /8529x70/
> rule 2 /^\(.*\)/ /8529\1/
> !
> voice translation-rule 3
> rule 1 /^9\(.*\)/ /\1/
> !
> !
> voice translation-profile my-profile-Outbound
> translate calling 2
> translate called 3
> !
> dial-peer voice 111 pots
> description "Outbound PSTN"
> translation-profile outgoing my-profile-Outbound
> !
>
>
>
> Regards,
>
> Mark
>
> On Tue, Apr 22, 2008 at 3:25 PM, Ryan West <rwest at zyedge.com> wrote:
>
> Mark,
>
>
>
> What I gave you before was a translate calling (your DNIS), the second
> rule 1 should be applied for translated called.
>
>
>
> -ryan
>
>
>
> *From:* Mark Mclean [mailto:m.mclean08 at gmail.com]
> *Sent:* Tuesday, April 22, 2008 9:23 AM
>
>
> *To:* Ryan West
> *Cc:* cisco-voip at puck.nether.net
> *Subject:* Re: [cisco-voip] CCM Express Ext. to PSTN and PSTN to Ext.
>
>
>
> Thanks Ryan, but would that cancel this rule: rule 1 /^100/ /8529x70/ (to
> make ext 100 when placing outpound call go out to the PSTN with the Caller
> ID:8529x70) if yes how i can acheive both in the outbound translation rule.
>
>
>
> Regards,
>
> Mark
>
> On Tue, Apr 22, 2008 at 3:15 PM, Ryan West <rwest at zyedge.com> wrote:
>
> Here you go, just place this into a voice translation-rule
>
>
>
> rule 1 /^9\(.*\)/ /\1/
>
>
>
> -ryan
>
>
>
> *From:* Mark Mclean [mailto:m.mclean08 at gmail.com]
> *Sent:* Tuesday, April 22, 2008 9:12 AM
>
>
> *To:* Ryan West
> *Cc:* cisco-voip at puck.nether.net
> *Subject:* Re: [cisco-voip] CCM Express Ext. to PSTN and PSTN to Ext.
>
>
>
> How can this be done for the outbound translation rule you gave me:
>
>
>
> voice translation-rule 2
> rule 1 /^100/ /8529x70/
> rule 2 /^\(.*\)/ /8529\1/
>
> Regards,
>
> Tamer
>
>
>
> On Tue, Apr 22, 2008 at 3:07 PM, Ryan West <rwest at zyedge.com> wrote:
>
> Since you are already deeply in bed with translation patterns, I would
> just continue on that route, even if you use a variable length
> destination-pattern match, you'll still need to use a translation pattern to
> strip out the 9 for international calling.
>
>
>
> *From:* Mark Mclean [mailto:m.mclean08 at gmail.com]
> *Sent:* Tuesday, April 22, 2008 9:05 AM
>
>
> *To:* Ryan West
> *Cc:* cisco-voip at puck.nether.net
> *Subject:* Re: [cisco-voip] CCM Express Ext. to PSTN and PSTN to Ext.
>
>
>
> Ryan, sorry i can follow you, but why should i do this? i guess the 9 in
> the destination-pattern should be removed by defualt! is that correct?
>
>
>
>
>
>
> On Tue, Apr 22, 2008 at 2:47 PM, Ryan West <rwest at zyedge.com> wrote:
>
> Mark,
>
>
>
> You can use a outbound called number translation to search on 9/.*/ and
> then replace that with the number without 9 or you can create multiple
> outbound peers, which will also help with outbound interdigit timeout
> issues. Or you can use the secondary-dialtone under the telephony-service
> section to accomplish that as well, I think :)
>
>
>
> -ryan
>
>
>
>
>
>
>
> *From:* Mark Mclean [mailto:m.mclean08 at gmail.com]
> *Sent:* Tuesday, April 22, 2008 8:39 AM
>
>
> *To:* Ryan West
> *Cc:* cisco-voip at puck.nether.net
> *Subject:* Re: [cisco-voip] CCM Express Ext. to PSTN and PSTN to Ext.
>
>
>
> Dear Ryan,
>
> I applied the configurations and everything looks fine, however i have a
> simple problem, the internal extensions when they try to place an outbound
> call they dial 9 the problem is that the dial-peer voice 111 forward the 9
> to the PSTN without removing it.
> Here is the dial-peer config:
>
>
>
> !
> dial-peer voice 111 pots
> description "Outbound PSTN"
> translation-profile outgoing my-profile
> destination-pattern 9T
> direct inward-dial
> no digit-strip
> port 0/1/0:15
> forward-digits all
> !
> Thanks for the support...
>
> Regards,
>
> Mark
>
>
>
>
>
> On Mon, Apr 21, 2008 at 3:49 PM, Mark Mclean <m.mclean08 at gmail.com> wrote:
>
> Thanks, i will test and update you...
>
> Mark
>
> On Mon, Apr 21, 2008 at 3:45 PM, Ryan West <rwest at zyedge.com> wrote:
>
> Yes to the first 2 questions. Change the translation profile to an
> inbound and outbound profile and then change dial-peer voice 112 pots to
> something like this:
>
>
>
> dial-peer voice 112 pots
> description "Inbound PSTN"
>
> translation-profile incoming my-profile-inbound
>
> preference 0
> incoming-called number .
>
> direct inward-dial
>
>
> no digit-strip
> port 0/3/0:15
> forward-digits all
>
>
>
> voice translation-profile my-profile-inbound
>
> translated called 1
>
>
>
>
>
> -ryan
>
>
>
> *From:* Mark Mclean [mailto:m.mclean08 at gmail.com]
> *Sent:* Monday, April 21, 2008 9:40 AM
> *To:* Ryan West
> *Cc:* cisco-voip at puck.nether.net
> *Subject:* Re: [cisco-voip] CCM Express Ext. to PSTN and PSTN to Ext.
>
>
>
> Thanks, Mark for you response, but please accept my apologies as i do not
> understand the part for the translation!
>
> From your example; i guess using voice translation-rule 1 will route the
> inbound calls from the PSTN to the internal extensions, please correct me if
> i am wrong!
>
>
>
> And what about voice translation-rule 2, the 1st line ( rule 1 /^100/
> /8529x70/ ) does it mean the outgoing call from ext 100 will go to the PSTN
> using 8529xx70 ? and the 2nd line ( rule 2 /^\(.*\)/ /8529\1/ ) does it
> mean whatever the internal ext. is just use it after 8529xx and send this
> called ID to the PSTN?
>
>
>
> And the final question, how can i use this under the dial peer? should be
> something like this:
>
>
>
> !
> dial-peer voice 111 pots
> description "Outbound PSTN"
> translation-profile outgoing my-profile
>
> preference 0
> destination-pattern .T
> no digit-strip
> port 0/3/0:15
> forward-digits all
> !
>
> !
> dial-peer voice 112 pots
> description "Inbound PSTN"
> translation-profile incoming my-profile
>
> preference 0
> destination-pattern .T
> no digit-strip
> port 0/3/0:15
> forward-digits all
> !
>
> Thanks again...
>
> Marks
>
> On Mon, Apr 21, 2008 at 2:54 PM, Ryan West <rwest at zyedge.com> wrote:
>
> Mark,
>
>
>
> You can accomplish the desired configuration by removing 'dialplan-pattern
> 1 21850.. extension-length 2' and going with an inbound and outbound
> translation / number expansion pattern. You should really try to have some
> of the numbers match their external DIDs, overall it is much easier to
> program that way and more difficult to troubleshoot later. Most of the
> time, setting the expectation of the customer that they will have new
> internal extensions is really not that big of a deal.
>
>
>
> voice translation-rule 1
>
> rule 1 /^8529x70/ /100/
>
> rule 2 /^8529x88/ /100/
>
> rule 3 /^8529x71/ /some fax number/
>
> ……
>
> ….
>
> …
>
> …
>
> ..
>
>
>
> voice translation-rule 2
>
> rule 1 /^100/ /8529x70/
>
> rule 2 /^\(.*\)/ /8529\1/
>
>
>
> voice translation-profile my-profile
>
> translate calling 2
>
> translate called 1
>
>
>
> As you can see, you're going to keep creating these rules. The rules are
> called from voice translation-profiles which are applied to the dial-peer(s)
> going to and from the PSTN. In a simplified configuration, you could use a
> single dial-peer to perform the translation in either direction.
>
>
>
> -ryan
>
>
>
> *From:* cisco-voip-bounces at puck.nether.net [mailto:
> cisco-voip-bounces at puck.nether.net] *On Behalf Of *Mark Mclean
> *Sent:* Monday, April 21, 2008 7:38 AM
> *To:* cisco-voip at puck.nether.net
> *Subject:* [cisco-voip] CCM Express Ext. to PSTN and PSTN to Ext.
>
>
>
> Dear All,
>
>
>
> I have a Cisco Router acting as Call Manager Express, I am new to the
> Cisco voice solutions and I would like to acheive the following (my current
> configuration included below)
>
>
>
> The PSTN trunk telephone number range is 8529xx70 to 8529xx99 (30
> numbers) and the provider only sends 7 digits as DNIS.
>
>
>
> - Internal Ext. should be able to call each other
>
>
> - There will be direct numbers where 8529xx70 will be routed to
> extension 100, and 8529xx88 to extension 100 as well,
>
>
> - The following number 8529xx71 to be routed to a FAX
>
>
> - Plus each one will have one or more direct numbers from the range
> above
>
> One more questions I want to ask, How to make it possible to place a
> caller ID that will depend on the party who initiate the call? For example
> when extension 177 dial out using the PSTN trunk the prime number "8529xx70"
> will be sent, what i want to do is if extension 107 dial out to the PSTN the
> caller ID will be sent as 8529xx77.
>
>
>
> Note: The current configurations inculded below...
>
> Apprecieate you quick replies!
>
> Thanks,
>
> Mark
>
>
> ---------------------------------------------------------------------------------
>
> !
> version 12.4
> service timestamps debug datetime msec localtime
> service timestamps log datetime msec localtime
> service password-encryption
> !
> hostname CallManagerExpress
> !
> boot-start-marker
> boot-end-marker
> !
> logging buffered 16000 debugging
> !
> aaa new-model
> !
> !
> aaa authentication banner ^CC
> Unauthorized access is not allowed
>
> aaa authentication login default local
> aaa authentication enable default none
> aaa authorization exec default local
> aaa authorization network default local
> !
> aaa session-id common
> !
> resource policy
> !
> clock timezone EST 1
> clock summer-time EST recurring last Sun Mar 2:00 last Sun Oct 3:00
> no network-clock-participate wic 3
> ip subnet-zero
> !
> !
> ip cef
> no ip dhcp use vrf connected
> ip dhcp excluded-address 192.168.45.1 192.168.45.4
> !
> ip dhcp pool ip-voice-HK
> network 192.168.45.0 255.255.255.0
> default-router 192.168.45.1
> option 150 ip 192.168.45.1
> domain-name yourdomain.com
> !
> !
> ip tftp source-interface Loopback2
> ip domain name yourdomain.com
> ip dhcp-server 192.168.45.1
> isdn switch-type primary-net5
> !
> !
> trunk group bri
> !
> !
> trunk group 1
> !
> voice-card 0
> no dspfarm
> !
> !
> voice call convert-discpi-to-prog
> !
> voice service voip
> h323
> h245 caps mode restricted
> !
> !
> voice class codec 1
> codec preference 1 g711alaw
> codec preference 2 g729r8
> codec preference 3 g711ulaw
> codec preference 4 g723ar63
> !
> !
> !
> voice class h323 1
> call start slow
> !
> !
> !
> crypto pki trustpoint TP-self-signed-84563672238598
> enrollment selfsigned
> subject-name cn=IOS-Self-Signed-Certificate-84563672238598
> revocation-check none
> rsakeypair TP-self-signed-84563672238598
> !
> !
> crypto pki certificate chain TP-self-signed-84563672238598
> certificate self-signed 01
> !
> !
> controller E1 0/3/0
> pri-group timeslots 1-31
> framing NO-CRC4
> !
> !
> interface Loopback2
> no ip address
> !
> interface GigabitEthernet0/0
> description Voice
> no ip address
> duplex auto
> speed auto
> h323-gateway voip interface
> !
> interface GigabitEthernet0/0.44
> encapsulation dot1Q 44
> ip address 192.168.45.1 255.255.255.0
> no snmp trap link-status
> !
> interface GigabitEthernet0/1
> description Data
> ip address 192.168.40.4 255.255.255.0
> duplex auto
> speed auto
> !
> ip default-gateway 192.168.40.1
> ip classless
> ip route 0.0.0.0 0.0.0.0 192.168.40.1
> !
> !
> ip http server
> ip http access-class 23
> ip http authentication local
> ip http secure-server
> ip http timeout-policy idle 60 life 86400 requests 10000
> ip http path flash:
> !
> access-list 23 permit 192.168.10.0 0.0.0.7
> access-list 23 permit 192.168.45.0 0.0.0.7
> access-list 23 permit 192.168.45.0 0.0.0.255
> no cdp log mismatch duplex
> !
> !
> tftp-server flash:ATA030100SCCP040211A.zup
> tftp-server flash:P00403020214.bin
> tftp-server flash:P00307020200.bin
> tftp-server flash:CP7912060000SCCP050124A.sbin
> tftp-server flash:P00305000600.bin
> tftp-server flash:P00305000600.sbn
> tftp-server flash:P00307020200.loads
> tftp-server flash:P00307020200.sb2
> tftp-server flash:P00307020200.sbn
> tftp-server flash:S00103020002.bin
> tftp-server flash:S00104000100.sbn
> tftp-server flash:CP7902060000SCCP050124A.sbin
> tftp-server flash:CP7905060000SCCP050124A.sbin
> tftp-server flash:CP7905060000SCCP050124A.zup
> tftp-server flash:P00303020214.bin
> !
> control-plane
> !
> !
> !
> telephony-service
> load 7935 P00503010100
> load 7960-7940 P00303020214
> load 7914 S00103020002
> load ATA ATA030101SCCP040610A.zup
> load 7912 CP7912010200SCCP031023A.sbin
> max-ephones 30
> max-dn 150
> ip source-address 192.168.45.1 port 2000
> max-redirect 8
> system message HK CallManager Express
> url services http://192.168.45.4/cisco/services.asp
> url authentication http://192.168.40.4/Authenticate.asp
> network-locale CH
> time-format 24
> date-format dd-mm-yy
> create cnf-files version-stamp 7960 Nov 22 2006 11:57:52
> dialplan-pattern 1 21850.. extension-length 2
> voicemail 9948
> max-conferences 4 gain -6
> call-forward pattern .T
> test test.wav
> web admin system name admin password XXXX
> dn-webedit
> time-webedit
> transfer-system full-consult
> transfer-pattern 7..
> secondary-dialtone 0
> !
> !
> ephone-dn 1 dual-line
> number 100
> label reception
> name reception
> !
> !
> ephone-dn 2 dual-line
> number 101
> label phone2
> name Desk2
> !
> !
> ephone-dn 3 dual-line
> number 102
> label phone3
> name Desk3
> !
> !
> ephone-dn 4 dual-line
> number 103
> label phone4
> name Desk4
> !
> !
> ephone-dn 5 dual-line
> number 104
> label phone5
> name Desk5
> !
> !
> ephone-dn 6 dual-line
> number 105
> label phone6
> name Desk6
> !
> !
> ephone-dn 7 dual-line
> number 106
> label phone7
> name Desk7
> !
> !
> !
> !
> ephone 1
> mac-address 001A.6D27.6B91
> type 7960
> button 1:1
> !
> !
> !
> ephone 2
> mac-address 0004.F2E2.08CA
> type 7936
> button 1:2
> !
> !
> !
> ephone 3
> mac-address 001B.0C18.DA91
> type 7940
> button 1:3
> !
> !
> !
> ephone 4
> mac-address 001B.0C18.AC97
> type 7940
> button 1:4
> !
> !
> !
> ephone 5
> mac-address 0019.30D4.AC14
> type 7940
> button 1:5
> !
> !
> !
> ephone 6
> mac-address 001B.0C18.C967
> type 7940
> button 1:6
> !
> !
> !
> ephone 7
> mac-address 001B.0C18.B8FA
> type 7940
> button 1:7
> !
> !
> !
> scheduler allocate 20000 1000
> ntp clock-period 17208075
> ntp server 192.168.40.1
> ntp server 192.168.40.254
> !
> end
> !
>
>
> ---------------------------------------------------------------------------------
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080422/62f4144c/attachment-0001.html
More information about the cisco-voip
mailing list