[cisco-voip] AbbrDial when speakerphone is disabled

[Lelio Fulgenzi]

Try this, I just tested it and it works.

Pick up handset.
Press EndCall software with handset still in your hand.
Press Speed Dial index key and the the AbbrDial softkey. It should dial the number.

It does the same thing with the headset.

It's a workaround to say the least. Definately calls into question the design for sure.

Lelio
--------------------------------------------------------------------------------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
Java-Clavis-Domus Theorem: The ability to keep your hands on the home keys is inversely
related to the amount of caffeine ingested in the last 30 minutes. 

  ----- Original Message ----- 
  From: Wolfe, Robert 
  To: cisco-voip at puck.nether.net 
  Sent: Tuesday, April 22, 2008 5:43 PM
  Subject: [cisco-voip] AbbrDial when speakerphone is disabled


  When the speakerphone is disabled on any 797X or 796X phone, the SoftKeys are disabled until the device goes off-hook.  How does one use Abbreviated Dials with the speakerphone disabled, since the AbbrDial SoftKey is only available in an on-hook, after-first-digit state?  I'm on 6.01a.

   

  Thanks in advance,

   

  -rob

   

  Rob Wolfe  |   Consultant    |   burwood group, inc.
  rwolfe at burwood.com   |   Work: 312 327 4634   |   Cell: 312 593 0605   |   Fax: 312 327 4601

   



------------------------------------------------------------------------------


  _______________________________________________
  cisco-voip mailing list
  cisco-voip at puck.nether.net
  https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080422/eddee72f/attachment-0001.html