[cisco-voip] Cisco 6513 goes straight into rommon

[Jonathan Charles]

We just deployed a 6513E with a Sup720.

It is running IOS, but when it reboots it goes straight into rommon
and you need to type boot to get it to load... once you do that it
boots fine...

My worry is that this site has power issues...

Here is some output:

6513#sh boot
BOOT variable = sup-bootdisk:s3223-ipbase_wan-mz.122-18.SXF8.bin,12;
CONFIG_FILE variable does not exist
BOOTLDR variable does not exist
Configuration register is 0x2102

Standby is not present.
6513#sh log

[output truncated]

00:01:01: RP: Currently running ROMMON from S (Gold) region
00:01:16: %SYS-6-CLOCKUPDATE: System clock has been updated from
02:14:42 UTC Wed Apr 23 2008 to 19:14:42 PDT Tue Apr 22 2008,
configured from console by console.
00:01:16: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for type vlan
00:01:17: %SYS-5-CONFIG_I: Configured from memory by console
00:01:19: %SYS-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (tm) s3223_rp Software (s3223_rp-IPBASE_WAN-M), Version
12.2(18)SXF8, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by cisco Systems, Inc.
Compiled Fri 02-Mar-07 21:29 by tinhuang
00:01:19: %MFIB_CONST_RP-6-REPLICATION_MODE_CHANGE: Replication Mode
Change Detected. Current system replication mode is Ingress
00:00:05: %SYS-3-LOGGER_FLUSHED: System was paused for 00:00:00 to
ensure console debugging output.

00:00:09: %OIR-SP-6-CONSOLE: Changing console ownership to route processor



00:00:09: %SYS-SP-3-LOGGER_FLUSHED: System was paused for 00:00:00 to
ensure console debugging output.


Firmware compiled 20-Feb-07 14:12 by integ Build [100]


00:01:11: %SPANTREE-SP-5-EXTENDED_SYSID: Extended SysId enabled for type vlan
00:01:19: %SYS-SP-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (tm) s3223_sp Software (s3223_sp-IPBASE_WAN-M), Version
12.2(18)SXF8, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by cisco Systems, Inc.
Compiled Fri 02-Mar-07 21:28 by tinhuang
00:01:19: SP: Currently running ROMMON from S (Gold) region
00:01:20: %MLSM-6-MMLS_MODE_CHANGE: MMLS: Replication Mode Changed to
Egress mode (Oir event)
00:01:21: %OIR-SP-6-INSPS: Power supply inserted in slot 1
00:01:21: %C6KPWR-SP-4-PSOK: power supply 1 turned on.
00:01:21: %OIR-SP-6-INSPS: Power supply inserted in slot 2
00:01:21: %C6KPWR-SP-4-PSOK: power supply 2 turned on.
00:01:21: %C6KPWR-SP-4-PSREDUNDANTBOTHSUPPLY: in power-redundancy
mode, system is operating on both power supplies.
00:01:23: %C6KENV-SP-4-FANHIOUTPUT: Version 2 high-output fan-tray is in effect
00:01:29: %DIAG-SP-6-RUN_MINIMUM: Module 7: Running Minimal Diagnostics...
00:01:41: %MLSM-6-MMLS_MODE_CHANGE: MMLS: Replication Mode Changed to
Ingress mode (Oir event)
00:01:40: %DIAG-SP-6-DIAG_OK: Module 7: Passed Online Diagnostics
00:01:42: %DIAG-SP-6-RUN_MINIMUM: Module 2: Running Minimal Diagnostics...
00:01:43: %OIR-SP-6-INSCARD: Card inserted in slot 7, interfaces are now online
00:01:50: %DIAG-SP-6-DIAG_OK: Module 2: Passed Online Diagnostics


Any ideas?



Jonathan