[cisco-voip] [c-nsp] Cisco 6513 goes straight into rommon

[Jonathan Charles]

AMLIATLCORE#remote command switch sh boot

BOOT variable = bootdisk:s3223-ipbase_wan-mz.122-18.SXF8.bin,12;
CONFIG_FILE variable does not exist
BOOTLDR variable does not exist
Configuration register is 0x2100

AMLIATLCORE#

That may be it, how do we change it???



Jonathan

On Tue, Apr 22, 2008 at 10:24 PM, Dale Shaw <dale.shaw at gmail.com> wrote:
> What does "remote command switch sh boot" say the config-register is?
>
>  Is it possible the SP is set to boot to ROMMON, but the RP isn't?
>  (seems unlikely, since if the RP is 0x2102, a "wr m"/"copy run start"
>  would sort out the SP confreg value)
>
>  cheers,
>  Dale
>
>
>
>  On Wed, Apr 23, 2008 at 12:52 PM, Jonathan Charles <jonvoip at gmail.com> wrote:
>  > We just deployed a 6513E with a Sup720.
>  >
>  >  It is running IOS, but when it reboots it goes straight into rommon
>  >  and you need to type boot to get it to load... once you do that it
>  >  boots fine...
>  >
>  >  My worry is that this site has power issues...
>  >
>  >  Here is some output:
>