[cisco-voip] Need to disable call waiting

[Lelio Fulgenzi]

>From Cisco Unified Communications Manager Administration Guide Release 6.1(1)

http://cisco.com/en/US/docs/voice_ip_comm/cucm/admin/6_1_1/ccmcfg/bccm.pdf



      Busy Trigger
     This setting, which works in conjunction with Maximum Number of Calls and Call Forward Busy, determines the maximum number of calls to be presented at the line. If maximum number of calls is set for 50 and the busy trigger is set to 40, incoming call 41 gets rejected with a busy cause (and will get forwarded if Call Forward Busy is set). If this line is shared, all the lines must be busy before incoming calls get rejected.

      Use this field in conjunction with Maximum Number of Calls for CTI route points. The default specifies 4500 calls.

      TipTo review how this setting works for devices with shared line appearances, refer to "Shared Line Appearance" in the Cisco Unified Communications Manager System Guide.
     
--------------------------------------------------------------------------------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
"Bad grammar makes me [sic]" - Tshirt

----- Original Message ----- 
From: "Manuel De Miguel" <manuel.demiguel at grupoica.com>
To: <cisco-voip at puck.nether.net>
Sent: Thursday, April 24, 2008 7:37 AM
Subject: [cisco-voip] Need to disable call waiting


> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080424/f4842447/attachment.html