[cisco-voip] VPIM to 3rd party UM

[Pat Hayes]

I believe that is because, as part of VPIM messaging with Unity, you 
have to install a connector in exchange that grabs any inbound messages 
with VPIM headers so that it can process them and deliver them to the 
appropriate subscriber. If the receiving system were in the same 
exchange org, that connector would just keep picking the messages up, 
not allowing them to reach the remote system (unless of course it had a 
similar connector, and then they'd just conflict with each other..).

-------- Original Message  --------
From: ipt <voiptime at gmail.com>
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] VPIM to 3rd party UM
Date: 4/24/2008 5:03 PM

> We have Cisco Unity 4.2(1) at corporate, and an another system 
> configured for it's flavor UM at a remote site (same Exchange org 
> company wide).  We were hoping to connect them with VPIM, but the Cisco 
> VPIM requirements doc says:
> 
> "The remote voice messaging system(s) with which Cisco Unity will be 
> networked cannot be in the same Exchange organization as the Cisco Unity 
> server."
> 
> I guess the answer here is clear that I can't use VPIM in my case...just 
> wondering if anyone happens to know any details about what the 
> conflict(s) are.
> 
>  
> 
> Thanks!
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip