[cisco-voip] IP communicator with NAT

[Scott Voll]

or better yet.  look into the phone proxy service to secure your CM's
better.  I hear that the ASA has this service built in.... but I have not
seen it yet.

Scott

On Fri, Apr 25, 2008 at 7:37 AM, Matthew Saskin <matt at saskin.net> wrote:

> What device is handling NAT?  The problem is not IP communicator specific.
>
> Unless things have changed recently, you've basically got to have a
> Cisco device (router or ASA) of specific code release or higher to
> properly handle NAT for cisco IP phones.
>
> -matt
>
> Baddorf, Becky wrote:
> > We are using NAT to get to our client servers.  IP communicator does not
> > function with NAT in our environment.  Does anyone else use IP Comm with
> > NAT?
> >
> > Thanks!
> >
> > Becky Baddorf
> >
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080425/eb18e102/attachment-0001.html