[cisco-voip] Typical 3560 Port

[David Zhars]

Here's a typical port on my 3560POE

interface FastEthernet0/7
 switchport access vlan 12
 switchport voice vlan 6
 shutdown
 srr-queue bandwidth share 10 10 60 20
 srr-queue bandwidth shape  10  0  0  0
 mls qos trust device cisco-phone
 mls qos trust cos
 auto qos voip cisco-phone
 spanning-tree portfast
 spanning-tree bpduguard enable


Obviously, if I had a device there, I would not have it in shutdown mode!

My bigger question is do I need these lines:

mls qos trust device cisco-phone
 mls qos trust cos

Do they do any harm, since there is no trunking on this port?  Should I set
the port to 'mode access'?

Thank you!
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081201/0eb61eca/attachment.html>