[cisco-voip] Calling Search Space

[William Roy]

I had this question on this alias a couple of months ago and Mike Lydick provided the following workaround.

Use CTI route points with a call forward set with a wild card mask. So in your case have a CTI route point with the following characteristics:

DN = 80XX
CFA = 73180XX

The call  is seen as a call forward and you may have to wait for the interdigit timer to expire before the call is placed, but it works a treat and gets around the translation urgent priority issue.


cheers,
Wil

________________________________
From: cisco-voip-bounces at puck.nether.net [cisco-voip-bounces at puck.nether.net] On Behalf Of Jason Aarons (US) [jason.aarons at us.didata.com]
Sent: Tuesday, 2 December 2008 12:02 AM
To: Ryan Ratliff; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Calling Search Space

Any workaround? Not clear how I can expand local calls to the 7-digit number.

From: Ryan Ratliff [mailto:rratliff at cisco.com]
Sent: Monday, December 01, 2008 9:41 AM
To: Jason Aarons (US); cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] Calling Search Space

Think of a translation pattern like a route pattern with urgent priority set.  This means as soon as it is matched it will be used to route the call, regardless of potential matches.  The first four digits of 8063104 match 80XX thus the call is routed using the translation pattern.


-Ryan


________________________________
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jason Aarons (US)
Sent: Monday, December 01, 2008 9:01 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Calling Search Space
CallManager 6.1.2-1002-1

CallingSearchSpaceA
    Internal_PT has phone with DN=8063104
    Translations_PT has Translation Pattern 80XX to 73180XX

When dialing 8063104 the number is translated to 7318063.

I’m trying to find the documentation on cisco.com that shows the CallManager logic. I expected the match in Partition to be found first and completed, not translated. I’m deploying Variable-Length On-Net Dial Plans with Flat Addressing.  You 7-digit dial another office, but can 4 digit locally which expands to 7-digit.



________________________________

Disclaimer: This e-mail communication and any attachments may contain confidential and privileged information and is for use by the designated addressee(s) named above only. If you are not the intended addressee, you are hereby notified that you have received this communication in error and that any use or reproduction of this email or its contents is strictly prohibited and may be unlawful. If you have received this communication in error, please notify us immediately by replying to this message and deleting it from your computer. Thank you.

________________________________

Disclaimer: This e-mail communication and any attachments may contain confidential and privileged information and is for use by the designated addressee(s) named above only. If you are not the intended addressee, you are hereby notified that you have received this communication in error and that any use or reproduction of this email or its contents is strictly prohibited and may be unlawful. If you have received this communication in error, please notify us immediately by replying to this message and deleting it from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081202/256943b3/attachment-0001.html>