[cisco-voip] CCM 6.1 subscriber installation issue

[Ryan Ratliff]

Licensing won't prevent you from doing the install.  It will keep the  
CCM service from running however.

Make sure you've added the subscriber (by IP address to rule out any  
dns issues) to System->Server on the publisher.

The communication the sub uses to the pub should be UDP on port  
8500.  It uses this to exchange certificate info with the publisher,  
after which the firewall on the pub will open up ports for db  
communication, etc.

In vmware, especially on the same host, it may be difficult to  
troubleshoot this.  You can try getting a packet capture from the pub  
while the sub install goes.  Check to make sure you see the traffic  
to and from the servers on udp 8500.

-Ryan

On Dec 2, 2008, at 6:03 AM, Lewis, Chris wrote:

You are only licensed to a single CCM server and 50 DLU's when using  
UCM 6.x with VMWare.

if you need a second node then you need to purchase some licenses for  
all your requirements.

Thanks

Chris

The information contained in this message and its attachments
is intended only for the private and confidential use of the
intended recipient(s).  If you are not the intended recipient
(or have received this e-mail in error) please notify the
sender immediately and destroy this e-mail. Any unauthorized
copying, disclosure or distribution of the material in this e-
mail is strictly prohibited.

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081202/1a1c082e/attachment.html>