[cisco-voip] Renaming a Partition

[Ryan Ratliff]

6.1(2) will tell you devices in that partition have to be reset if  
changing a partition name.

If you are going to do it just keep an eye out for strange behavior  
like calls not forwarding, etc.

-Ryan

On Dec 2, 2008, at 12:18 PM, Jeffrey Ollie wrote:

Quick question:

In CM 4.x you had to reboot the cluster if you renamed a partition.
Is this still the case in 5.1.3?

-- 
Jeff Ollie

"You know, I used to think it was awful that life was so unfair. Then
I thought, wouldn't it be much worse if life were fair, and all the
terrible things that happen to us come because we actually deserve
them? So, now I take great comfort in the general hostility and
unfairness of the universe."

	-- Marcus to Franklin in Babylon 5: "A Late Delivery from Avalon"
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081202/e8154519/attachment.html>