[cisco-voip] PAB as an IP Service

[James Buchanan]

Use the same URL with "=fd" instead of "=pd" at the end for Fast Dials. 

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Erick Bergquist
Sent: Wednesday, December 03, 2008 10:53 PM
To: Carter, Bill
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] PAB as an IP Service

I have the following working on a 6.1.2.1000-13 system...

Steps:

1. Create a phone service named personal directory, etc.

2. Use the following url

http://ServerIPAddress:8080/ccmpd/login.do?name=#DEVICENAME#&service=pd


3. Add the following service parameters (no default value)

- pin
- userid

4. Go to the phone you would like to add the service to.

5. Go to related links -> Subscribe/Unsubscribe Services

6. Select the service you created -> next

7. In the userid field enter users id

8. In the pin field, enter their PIN

9. Subscribe service to phone, save, and reset phone.

Add as a Service URL to phone button if you want.


On Wed, Dec 3, 2008 at 10:47 PM, Carter, Bill <bcarter at sentinel.com>
wrote:
>
http://www.cisco.com/en/US/partner/docs/voice_ip_comm/cucm/rel_notes/6_1
_2/cucm-rel_note-612.html#wp465202
>
>
>
> 6.1(2) Release Notes
>
> Personal Address Book can be configured as an IP phone
service....Great
> news, but what is the URL for PAB ????
>
>
>
> Improved Access to Personal Address Book
>
> Administrators can now set up a service URL that allows users to get
fast
> access to their Personal Address Book (PAB) as a service without
having to
> authenticate each time:
>
> The administrator modifies a phone button template to associate a
service
> URL and then assigns the phone button template to the user's phone.
>
> In Cisco Unified CM User Options, the user assigns the service URL to
an
> existing line button on the phone. The user can then press the line
button
> to access the PAB without having to authenticate.
>
> Cisco Unified CallManager Administration Configuration Tips
>
> Use the following tips to configure fast access to PAB in Cisco
Unified
> Communications Manager Administration:
>
> *Configure PAB as an IP phone service.
>
> *Modify a phone button template to associate a service URL with a line
> button
>
> GUI Changes
>
> The following fields on the IP Phone Services Configuration parameters
> support creation of the PAB phone service.
>
> -Service Name and ASCII Service Name-Enter a name to identify the
service.
>
> -Service URL-Enter the URL to access the PAB.
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip