[cisco-voip] Nokia SIP client - can't call number in phone contact

[Alessandro Bertacco]

Hi, I've deployed SIP client embedded in nokia e65, using CUCM6.1.2, but
I've problem calling the number stored in phone contact.

In fact, phone contact are stored in the mobile phone using the (+) sign and
after the international code. Is it possible to remove the plus sign? So,
after that I can manipulate number using call manager.

Thank you

Regards

Alessandro Bertacco

-----Messaggio originale-----
Da: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] Per conto di Omori, Hiroshi
Inviato: venerdì 6 giugno 2008 2.11
A: peter ejmont
Cc: 
Oggetto: Re: [cisco-voip] Nokia e61i SIP configuration

Thanks, Peter,

That worked!  

Hiroshi 
 


-----Original Message-----
From: peter ejmont [mailto:pejmont at gmail.com] 
Sent: Thursday, June 05, 2008 12:07 PM
To: Omori, Hiroshi
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Nokia e61i SIP configuration

few steps needed. for simplicity, I chose the same
userid/password/telephone number

create an end user in ccm (example follows)

user id --> 15025
pass --> 15025
last name --> 15025
telephone number --> 15025
digest credentials --> 15025
presence group --> standard presence group
leave mobility or mobile voice access boxes unchecked


add a nokia phone:
-add a third party sip device (basic)
-enter the mac address of the phone (enter *#62209526# on your phone
to get it)
-choose third-party sip device (basic) phone button template
-standard common phone profile
-owner user id -> 15025
-in protocol specific information:
--device security profile -> choose sip non-secure
--sip profile --> standard sip profile
--digest user  --> 15025

don't forget to make that device active.


now, on the phone itself:

menu->tools->settings->connection->sip settings
profile name -> any name you want
service profile -> IETF
public username -> sip:15025 at xxx.xxx.xxx.xxx  (basically ip address of
your call manager)
use compression -> no
use security -> no

registrar server address -> sip:xxx.xxx.xxx.xxx (ccm's ip address)
realm -> ccmsipline   (default on call manager)
user name -> 15025
password -> 15025
transport -> udp (or auto)
port -> 5060

if you use proxy:
same info as above.

this config will work for every nokia wifi enabled device.
hope this helps,

thanks,
peter




Omori, Hiroshi wrote:
> 
> 
> I was wondering if anyone on this listserve has configured a Nokia e61i
> SIP phone on a CUCM 6.1 cluster.  I can get the e61i to work as a SCCP
> phone but I'm not having much luck getting it to work as SIP device.
> 
>  
> 
> Any links or info would be appreciated. I haven't had any luck using the
> 3^rd party SIP device type.
> 
>  
> 
> I also loaded the cmterm-nokia_s60_2.0-sccp.cop.sgn file but it appears
> that file only makes the SCCP s60 device type appear. 
> 
>  
> 
> Thanks!
> 
>  
> 
> Hiroshi Omori
> 
> Network Engineer
> 
> UCLA - University of California , Los Angeles
> 
>  
> 
>  
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip