[cisco-voip] preventing message notification loops in unity/connection

[Ryan Ratliff]

For Unity do you have the DNs configured on the vm ports in UTIM?  I  
believe this was supposed to be used to prevent loops.  Not sure how  
connection comes into play, it's been a long time since I worked on  
Unity.

-Ryan

On Dec 8, 2008, at 5:30 PM, Lelio Fulgenzi wrote:

OK - I know this is going to be a silly question, but I just know  
it's gonna happen.

I just tested enabling my own extension as my notification device,  
and lo and behold, the system calls me when a message is left, and  
then leaves a message when I don't answer, and starts the cycle all  
over again.

Is there a way to prevent this? You'd think that it would check to  
see that the extension or any of the alternate extensions are not  
added as a notification device.

This could quickly bring the system down.



---
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
"Bad grammar makes me [sic]" - Tshirt

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081208/a07546d7/attachment.html>