[cisco-voip] CME and over-head paging

[Paul]

I highly recommend a Bogen TAM-B with an amplifier [sold seperately]. Worked great for simple CME installations.



----- Original Message ----
From: "Spoon, Rusty" <rusty.spoon at allvac.com>
To: Jeff Cartier <jcartier at acs.on.ca>
Cc: cisco-voip at puck.nether.net
Sent: Thursday, December 11, 2008 8:47:23 AM
Subject: Re: [cisco-voip] CME and over-head paging

Jeff,

I've deployed in a couple of locations using Valcom units running off an
FXO port.  In both cases the paging infrastructure was already in place
- we were migrating to an IP solution.  The only problem we ever had was
that the Valcom has to be wired directly to the FXO port; it cannot go
through a 66 block.

RS

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jeff Cartier
Sent: Tuesday, December 09, 2008 2:14 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] CME and over-head paging

Greetings All!



I'm looking for some opinions on what vendor & product would be a good
fit to meet the requirements of over-head paging in a CME deployment
scenario.



If the price isn't too ridiculous it would be beneficial for the
solution to be IP based.



Does anyone have any suggestions or real life experience in regards to
this?



Thanks!!!!

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip