[cisco-voip] Matching SIP npdi value in CUCM?

[Aman Chugh]

Erick,

I had a similar issue working on a Nortel to CUCM 6.1 integration sometime
back. CUCM 6 onwards , sip domain routing is used in DA. I had to set the
sip top level organization domain in CUCM  in enterprise parameters to get
it corrected. I remember posting this on the list as well.

http://www.gossamer-threads.com/lists/cisco/voip/98740?search_string=sip%20domain;#98740

HTH

Aman
On Tue, Dec 9, 2008 at 10:26 PM, Erick Bergquist <erickbee at gmail.com> wrote:

> Kind of new to SIP, is there a setting in CUCM 6.12 somewhere to match
> provider where SIP trunk is coming from? The IP address on the SIP
> trunk destination matches the providers IP address but they are using
> name for npdi.
>
> Snippets from CCM traces,
>
> INVITE sip:1234567;npdi at SIPprovider:5060;user=phone SIP/2.0
>
> then below this,
>
> CCM|Digit Analysis: Host Address=SIPprovider DOES NOT MATCH any
> address for this cluster.
> CCM|Digit Analysis: Host Address=SIPprovider DOES NOT MATCH top level
> org domain.
>
> Thanks
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081212/a2ee1d0f/attachment.html>