[cisco-voip] Drop call for 911?

[Michael Thompson]

I know a couple of people that have tried to use MLPP for this app.

If you look at the specs, there are specific requirements for use of MLPP.
Analog lines don't fit into that spec. 



-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of lelio at uoguelph.ca
Sent: Thursday, December 11, 2008 3:45 PM
To: Scott Voll
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Drop call for 911?

MLPP enabled route patterns?

Lelio Fulgenzi, Senior Analyst
Computing & Communications
University of Guelph
519-824-4120 x56354

...sent from my iPod - please pardon my fat fingers ;)

[XKJ2000]

On Dec 11, 2008, at 2:50 PM, "Scott Voll" <svoll.voip at gmail.com> wrote:

> I have a site that has 4 Pots lines and those are also the lines  
> they would dial 911 on.  if all 4 lines were in use, is there a way  
> to disconnect one so that the 911 call could still go out?  CM 6.1.2?
>
> other options beside more Pots lines or removing one of the incoming  
> lines?
>
> TIA
>
> Scott
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip