[cisco-voip] Unity with overlapping dial plan

[Lelio Fulgenzi]

Unity is not multi-tenant capable until v7 (and I think that's just Unity connection). 

I'm not sure how you can light an MWI on a phone that has the same DN as another phone. As far as I know, the way MWI works is that the ports sends a request to CallManager to dial the MWI extension on behalf of that phone. When I look at the traces, it's basically that extension dialing the MWI extension. 

Not sure if this will work with translations. 


--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
"Bad grammar makes me [sic]" - Tshirt 


----- Original Message ----- 
From: "Edward Countryman" <Edward.Countryman at provena.org> 
To: cisco-voip at puck.nether.net 
Sent: Tuesday, December 23, 2008 2:50:07 PM GMT -05:00 US/Canada Eastern 
Subject: [cisco-voip] Unity with overlapping dial plan 




Hello; My environment has overlapping extension ranges between sites. This is easy to manage in CCM but I am stumped with Unity. 



I can use separate VM profiles to modify the extension when it goes to Unity but don’t seem to be able to get the MWI lamps to light on the phones. My thought was to use a translation pattern that would modify the extension back when attempting to light the MWI. 



TAC was unable to resolve as well. Just wondering if it can even e done. 



If not, any advice on managing the overlap in dial plans with Unity? 
_______________________________________________ cisco-voip mailing list cisco-voip at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081223/c4748dd8/attachment.html>