[cisco-voip] Answer: two incoming dial peers

[Scott Voll]

Second dial peer would look more like this:

dial-peer voice 7 pots
 service ani_filter
 incoming called-number 5330
 direct-inward-dial
 port 3/1:23

Scott



On Mon, Dec 29, 2008 at 11:11 AM, Scott Voll <svoll.voip at gmail.com> wrote:

> So I have one incoming dial peer what I'm blocking 15 Calling numbers(not
> enough thus the second TCL script)  and using the Cname Tcl Script to get
> Calling name to our IP phones:
>
> dial-peer voice 1 pots
>  call-block translation-profile incoming block
>  preference 1
>  service cname
>  answer-address ....
>  destination-pattern 9911
>  direct-inward-dial
>  port 3/1:23
>  forward-digits 3
>
> If I was not worried about Cname on our main number could I add a second
> dial peer like this:
>
> dial-peer voice 7 pots
>  preference 1
>  service Block
>  answer-address 5330
>  direct-inward-dial
>  port 3/1:23
> So I could use the other Call blocking TCL script?  and it would only apply
> to the number 5330, right?
>
> Thanks
>
> Scott
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081229/de540d10/attachment.html>