[cisco-voip] flash size for cme on 2811

[Jonathan Charles]

Well, I did have a customer buy a 512MB CF card from Best Buy and
formatted it in the router, and it worked fine... and the card was $10

Cisco sells the same card for about $400

Jonathan

On Feb 1, 2008 7:33 AM, Anthony Kouloglou <akoul at dataways.gr> wrote:
>
>  All these are great ideas but cisco wants to drive us mad with its ...cheap
> policy regarding flash!!!
>  I have a 2851 ordered for CUCME and the customer has 7921, 7945, 7975,
> 7961, 7936, 7906 phones!!
>  You do anything with 64MB!
>  I had to buy a CF to do my job. And it only cost a few Euros!
>  Apparently cisco has too many 64MB CFs and does not know what to do with
> them!!
>
>  Anhony
>
>
>
>  Jonathan Charles wrote:
>  You can strip out the extra CME files you don't need (phone loads for
> phones you don't have, etc...), I have deployed CME with only 64MB of
> Flash this way...
>
>
> Jonatahn
>
> On Jan 31, 2008 6:59 PM, Eric Pedersen <eric.pedersen at sait.ca> wrote:
>
>
>
>
> We bought a CME router a few months ago which I am just setting up. It is a
> 2811 with 64mb of flash. I want to install cme 4.0 or 4.1 but the IOS image
> size and the cme files are more than 64mb. Do I need a bigger compact flash
> card?
>
>
>
> Thanks,
>
> Eric
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
>  _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>