[cisco-voip] T.38 and MGCP

[Moataz Mamdouh]

Hallo
Do u wanna use MGCP gateway controlled by the call manager ? , so to integrate with the right fax u have to setup an h.323 intercluster trunk between the call manager and the right fax . Your outbound calls from the right fax must point to the call manager ip address then a route pattern to the MGCP gateway .
To use T.38 as fax relay protocol ,your mgcp gateway must have these commands on it :

voice service voip
fax protocol t38 ls-redundancy 2 hs-redundancy 0 fallback none
h323
  h245 tunnel disable

mgcp package-capability fxr-package
mgcp fax t38 gateway force

Thanks 

       
---------------------------------
Be a better friend, newshound, and know-it-all with Yahoo! Mobile.  Try it now.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080204/039d275e/attachment.html