[cisco-voip] voip : translation-rule on cs 2801

[Kelemen Zoltan]

It might happen your rule is applied twice for one reason or another.

try using something more specific, so it wouldn't match on already 8 
digit numbers. For example this should work:
(cfg-translation-rule)#rule 1 /^8\(........\)/ /\1/

You should still check why is the rule applied twice, but with the above 
rule it won't matter anyway.

regards,
 Zoltan

henri philakham wrote:
> Hi
>
> i have this translation rule on my cs 2801 voice enabled GW but there 
> is a problem :
>
> - when user dials prefix 8 to get the local PTT line, they can call 
> and reach any fixed and mobile numbers BUT except the mobile numbers 
> starting with 8, i got the local PTT to come and check and they 
> confirmed they dont receive all the 8 digits of the mobile number 
> especially when it starts with 8 therefore the call is disconnected 
> from their end. So apprently my GW sends 8 digits for all mobile 
> numbers starting with 9 but not with 8 for some reason.
>
> - this the translation
> voice translation-rule 6
>  rule 1 /^8/ //
>
> - this is the test that shows that it removes the prefix 8 to get the 
> PTT line and forward all the remaining numbers
> MG-EMB-SIN#test voice translation-rule 6 890115850
> Matched with rule 1
> Original number: 890115850      Translated number: 90115850
> Original number type: none      Translated number type: none
> Original number plan: none      Translated number plan: none
>
> MG-EMB-SIN#test voice translation-rule 6 881388001
> Matched with rule 1
> Original number: 881388001      Translated number: 81388001
> Original number type: none      Translated number type: none
> Original number plan: none      Translated number plan: none
>
> MG-EMB-SIN#test voice translation-rule 6 80193356570072
> Matched with rule 1
> Original number: 80193356570072 Translated number: 0193356570072
> Original number type: none      Translated number type: none
> Original number plan: none      Translated number plan: none
>
>  can somebody help understand why is that the PTT does not receive the 
> first digit of the mobile number called when this one starts with 8xxx 
> xxxx but does receive all when it comes to a mobile number starting 
> with 9xxx xxxx ?
>
> Thanks for your reply
> ------------------------------------------------------------------------
> Express yourself instantly with MSN Messenger! MSN Messenger 
> <http://clk.atdmt.com/AVE/go/onm00200471ave/direct/01/>
> ------------------------------------------------------------------------
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>