[cisco-voip] analog door speakerphone

[Scott Voll]

are the doors key card locks?  if so, contact the key card vendor for there
offerings.  we ended up with one of those panel type phones on the outside.
it has a list of numbers to call.  once they call the number (its attached
via an ATA) the IP phone is answered and they can press the 9 and the door
is opened remotely.  works really slick.

Scott

On Feb 5, 2008 6:39 AM, Joel P <tman701 at gmail.com> wrote:

>
> Hey guys,
>
> I have a customer that wants a door speaker type device installed for a
> door
> that is normally unattended.
> Currently what I did was setup a 7911 using PLAR so that visitors to the
> door can get someone to come open the door. However that is only a
> temporary
> solution because the phone looks very attractive and alone out there.
>
> I suggested an analog set inside of a box with a lid, but they didn't want
> that. I looked at the Aiphone offerings but all of those are stand alone
> units. The customer wants a cost effective solution with only one unit
> that
> can be tied into the CM with a DN just like an analog set.
>
> The main reason for this is that they want the door unit to ring a
> huntgroup
> so that anyone can pick up and answer the door. From what I saw the
> aiphones
> wouldn't be able to do that.
>
> Any help is appreciated.
>
> Thanks,
>
> Joel P
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080205/328db6f8/attachment.html