[cisco-voip] Flash on AIM-CUE

[Jack Martin]

How do I determine how much flash memory is installed on a AIM-CUE without physically looking at it?  In other words is there a command I can issue from the CLI?


Here are the results from "show ver" and "show tech":
se-# sh ver
CPU Model:                    Celeron (Coppermine)
CPU Speed (MHz):              298.899
CPU Cache (KByte):            128
Chassis Type:                 C2801
Chassis Serial:               XXXXXXXXXXX
Module Type:                  AIM
Module Serial:                XXXXXXXXXXX



------------------ show interfaces ------------------
FastEthernet 0 is up, line protocol is up
  Internet address is xxx.xxx.xxx.xxx mask 255.255.255.0 (configured on router)
  Broadcast address is xxx.xxx.xxx.xxx
     8908691 input, 1795235233 bytes
     0 input errors
     6874246 output, 1330699723 bytes
     0 output errors

IDE hd0 is up, line protocol is up
     3272731 reads, 1711602688 bytes
     0 read errors
     733540 write, 814546944 bytes
     0 write errors
     2.2595% worn


------------------ show memory ------------------
Total Memory (kB):            255340
Active Memory (kB):           32956
Inactive Memory (kB):         200788
Other Memory (kB):            18144
MemoryPool (kB):              3452

Kernel Memory
  TOTAL   INUSE  MAXUSED     ERR TYPE
   2752    2153     6036       0 fs
   7416    7149     7596       0 other
    168      97      158       0 net

We are planning an upgrade of Unity Express for our end customer and so I need to know how much flash memory is installed.  I see from the information above that there is 256MB of NVRAM, or am I reading this wrong?

Thanks in advance for your help.


-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080207/52c5d5ee/attachment.html