[cisco-voip] Flash on AIM-CUE

[Erick Bergquist]

Show Diag from the router, then search for it on cisco or google and
you should find out the size. Post it here and I can check some notes
I have on different part #s.

On Feb 7, 2008 1:21 PM, Paul Choi <asobihoudai at yahoo.com> wrote:
> Jack,
>
> I think you can find out by looking at the CUE GUI.
> There should be some setting showing you how much of
> your CF card is occupied.
>
> Paul
>
>
> --- Jack Martin <jackm at tushaus.com> wrote:
>
> > How do I determine how much flash memory is
> > installed on a AIM-CUE without physically looking at
> > it?  In other words is there a command I can issue
> > from the CLI?
> >
> >
> > Here are the results from "show ver" and "show
> > tech":
> > se-# sh ver
> > CPU Model:                    Celeron (Coppermine)
> > CPU Speed (MHz):              298.899
> > CPU Cache (KByte):            128
> > Chassis Type:                 C2801
> > Chassis Serial:               XXXXXXXXXXX
> > Module Type:                  AIM
> > Module Serial:                XXXXXXXXXXX
> >
> >
> >
> > ------------------ show interfaces
> > ------------------
> > FastEthernet 0 is up, line protocol is up
> >   Internet address is xxx.xxx.xxx.xxx mask
> > 255.255.255.0 (configured on router)
> >   Broadcast address is xxx.xxx.xxx.xxx
> >      8908691 input, 1795235233 bytes
> >      0 input errors
> >      6874246 output, 1330699723 bytes
> >      0 output errors
> >
> > IDE hd0 is up, line protocol is up
> >      3272731 reads, 1711602688 bytes
> >      0 read errors
> >      733540 write, 814546944 bytes
> >      0 write errors
> >      2.2595% worn
> >
> >
> > ------------------ show memory ------------------
> > Total Memory (kB):            255340
> > Active Memory (kB):           32956
> > Inactive Memory (kB):         200788
> > Other Memory (kB):            18144
> > MemoryPool (kB):              3452
> >
> > Kernel Memory
> >   TOTAL   INUSE  MAXUSED     ERR TYPE
> >    2752    2153     6036       0 fs
> >    7416    7149     7596       0 other
> >     168      97      158       0 net
> >
> > We are planning an upgrade of Unity Express for our
> > end customer and so I need to know how much flash
> > memory is installed.  I see from the information
> > above that there is 256MB of NVRAM, or am I reading
> > this wrong?
> >
> > Thanks in advance for your help.
> >
> >
> > > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
> >
>
>
>
>       ____________________________________________________________________________________
> Never miss a thing.  Make Yahoo your home page.
> http://www.yahoo.com/r/hs
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>