[cisco-voip] "call preserve" doesn't exist

[Mark Noble]

can you apply the command under a voice-class and apply to a dial-peer?

voice-class h323 4
 call preserve
dial-peer voice 1 voip
 voice-class h323 4




From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Cheng
Sent: 10 February 2008 12:23
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] "call preserve" doesn't exist

Have CallManagers at central site and an H323 gateway with PRI at remote site. The remote h323 voice gateway is running IOS 12.4-11,
on the call manager , I enabled "Allow peer to preserve H323 calls"
on the voice gateway, I tried to config
voice service voip
h323
call preserve

but under h323, I can't find the call preserve command. then i added "no h225 timeout keepalive"  amd then block the ip connectivity between the phone and the callmanager server, the active call terminated shortly.

How can I preserve the active voice call when the WAN link fails?

Thanks in advance.
**********************************************************************************************
Notice:  The information transmitted in this e-mail message and any attachments are solely for the intended 
recipient and may contain confidential or privileged information.  If you are not the intended recipient, any 
review, transmission, dissemination or other use of this information is prohibited.  If you have received this 
communication in error, please notify the sender immediately and delete the material from any computer, 
including any copies.
**********************************************************************************************
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080210/da6d1339/attachment.html