[cisco-voip] new call manager 6 cluster adding subscriber

[Ryan Ratliff]

Specifically you have to activate the Cisco CallManager service on a  
server before it will show up in System->CallManagers.  The service  
doesn't have to be running but it does have to be activated.

-Ryan

On Feb 10, 2008, at 3:34 PM, al wrote:

Erik Erasmus (E) wrote:
> Hi
>
> I have a problem seeing a new call manager 6 subscriber to a call
> manager group. I installed the publisher first. Then did the
> installation of the subscriber without adding the subscriber in the
> publisher config. The sub install went up to the point where it
> complained about the connectivity to the PUB. I then added the config
> part for the new sub in the pub and the subsciber installed
> succesfully. However, now when I want to add the sub to the groub it
> is not visible as an available server.
>
>
> Can one safely delete the sub server on the pub - redo the sub config
> on the pub and re-install the sub or is there something else I need  
> to do.
>
>
Hi,

How is the status of the "call manager" service on the Subscriber ?
Before adding it on the Callmanager Group you have to lunch this service
(and have the appropriate licence)

Al.

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip