[cisco-voip] CCM5.1 - does it support more than one IP address?

[Matthew Saskin]

Not possible.  If you were to get root access (unsupported) you could 
probably set it up (and be very unsupported....)

-matt

Andy Saykao wrote:
> Does anyone know if Cisco Call Manager 5.1 can support more than one 
> IP address on it's NIC or if we can apply an IP to it's loopback 
> interface? We currently have an IP address assigned to the CCM server, 
> but would like the option to assign either a secondary IP address (aka 
> IP Alias / Multi-homing) or apply an IP to the loopback interface 
> (both possible on a unix box).
>  
> Cheers.
>  
> Andy
>
> This email and any files transmitted with it are confidential and 
> intended solely for the use of the individual or entity to whom they 
> are addressed. Please notify the sender immediately by email if you 
> have received this email by mistake and delete this email from your 
> system. Please note that any views or opinions presented in this email 
> are solely those of the author and do not necessarily represent those 
> of the organisation. Finally, the recipient should check this email 
> and any attachments for the presence of viruses. The organisation 
> accepts no liability for any damage caused by any virus transmitted by 
> this email.
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>