[cisco-voip] UCCX 5.0(2) and CME 4.2

[Mark Noble]

hi,

I am struggling to get this working, UCCx is only in partial_service. but all engines and subsystems are running, also the presence state is good and UCCx can configure triggers on CME, and agents can login. I have stripped it down to the basic AA script and this is the only application on the system. anyone else had trouble setting this up and care to share any pointers

thanks

-mark

**********************************************************************************************
Notice:  The information transmitted in this e-mail message and any attachments are solely for the intended 
recipient and may contain confidential or privileged information.  If you are not the intended recipient, any 
review, transmission, dissemination or other use of this information is prohibited.  If you have received this 
communication in error, please notify the sender immediately and delete the material from any computer, 
including any copies.
**********************************************************************************************
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080214/421fbb35/attachment.html