[cisco-voip] Night Bell

[Paul Choi]

Hmmmm....can you do a test, setup voice port with a
destination pattern and try to call it with another
phone?

If 48v is enough to keep the bell ringing...I wonder
why it wouldn't work when you call it off of an FXO. .
. 

--- Jonathan Charles <jonvoip at gmail.com> wrote:

> To be honest, the station idea made more sense to
> me, as we would be
> sending out ringing voltage...
> 
> 
> J
> 
> On Fri, Feb 15, 2008 at 3:21 PM, Jonathan Charles
> <jonvoip at gmail.com> wrote:
> > Well, I tried the FXO, and it answers, I guess,
> but no ringing...
> >
> >  Do I need an adapter of some sort?
> >
> >
> >  Jonathan
> >
> >
> >
> >  On Fri, Feb 15, 2008 at 3:18 PM, Paul Choi
> <asobihoudai at yahoo.com> wrote:
> >  > IMHO, it makes sense it would start ringing as
> soon as
> >  >  you put it on the system. There is nothing on
> that
> >  >  bell to open or close the circuit like on a
> telephone.
> >  >  I imagine that this is similar to the issue of
> having
> >  >  a paging system get "stuck" when you attach it
> to an
> >  >  FXS port.
> >  >
> >  >  Paul
> >  >
> >  >
> >  >
> >  >
> >  >  --- Jonathan Charles <jonvoip at gmail.com>
> wrote:
> >  >
> >  >  > No, just a bell on a wall as far as I can
> tell... it
> >  >  > has been painted
> >  >  > over a few hundred times...
> >  >  >
> >  >  >
> >  >  > Jonathan
> >  >  >
> >  >  > On Fri, Feb 15, 2008 at 2:58 PM, Craig
> Staffin
> >  >  > <craig at staffin.org> wrote:
> >  >  > > is it a night bell through a pageing
> system?
> >  >  > >
> >  >  > >
> >  >  > >
> >  >  > > On Fri, Feb 15, 2008 at 2:50 PM, Jonathan
> Charles
> >  >  > <jonvoip at gmail.com> wrote:
> >  >  > > >
> >  >  > > >
> >  >  > > >
> >  >  > > > I am installing a new site and I have
> >  >  > encountered my first Night Bell,
> >  >  > > > it is an old western electric thing that
> was
> >  >  > plugged into their old
> >  >  > > > PBX
> >  >  > > >
> >  >  > > > As soon as I configure a DN on it in
> MGCP, it
> >  >  > goes off hook and starts
> >  >  > > > ringing and the port is S_CONNECT...
> >  >  > > >
> >  >  > > > Same if I configure it H323
> >  >  > > >
> >  >  > > > It is connected to a VIC2-4FXS/DID set
> to POTS
> >  >  > in MGCP
> >  >  > > >
> >  >  > > >
> >  >  > > > Any ideas?
> >  >  > > >
> >  >  > > >
> >  >  > > >
> >  >  > > >
> >  >  > > >
> >  >  > > > Jonathan
> >  >  > > >
> _______________________________________________
> >  >  > > > cisco-voip mailing list
> >  >  > > > cisco-voip at puck.nether.net
> >  >  > > >
> >  >  >
> https://puck.nether.net/mailman/listinfo/cisco-voip
> >  >  > > >
> >  >  > >
> >  >  > >
> >  >  > >
> >  >  > > --
> >  >  > > Craig Staffin
> >  >  > > Craig at staffin.org
> >  >  > > (H) 262-437-7313
> >  >  > > (C) 262-613-6003
> >  >  >
> _______________________________________________
> >  >  > cisco-voip mailing list
> >  >  > cisco-voip at puck.nether.net
> >  >  >
> https://puck.nether.net/mailman/listinfo/cisco-voip
> >  >  >
> >  >
> >  >
> >  >
> >  >
> >  >
> >  >      
>
____________________________________________________________________________________
> >  >  Be a better friend, newshound, and
> >  >  know-it-all with Yahoo! Mobile.  Try it now. 
>
http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
> >  >
> >  >
> >
> 



      ____________________________________________________________________________________
Looking for last minute shopping deals?  
Find them fast with Yahoo! Search.  http://tools.search.yahoo.com/newsearch/category.php?category=shopping