[cisco-voip] CME Not enough rules in Translation Profiles

[Andrius Kislas]

1. Use num-exp. It will work ok for incoming calls from Telco.

2. Use voice translation profile for outgoing direction. But here you 
will face the same 15 rules problem. And I don't think you can solve it, 
because num-exp works only for called and not for calling number.

Andrius


Anthony Kouloglou wrote:
> Hi all,
> i have configured a CUCME 4.1 and i have 2 problems:
> 
> 1.
>  i have used the following translation rules so the 100 DDIs provided by 
> the Telco, go directly to local extensions (that are 3XXX):
> /
> voice translation-rule 1
>  rule 1 /300/ /3301/
>  rule 15 /^3/ /33/
> !
> !
> voice translation-profile TP01
>  translate called 1
> !
> voice-port 0/3/0:15
>  translation-profile incoming TP01
>  bearer-cap Speech
> !
> /It works fine but the customer wants that more than 15 local 
> extensions, do not have DDIs and instead these calls should be directed 
> to the operator - 3301.
> How am i going to do that if only 15 rules are configurable?/
> 
> /And Number 2 issue:
> it is desired that the called person to the PSTN cloud, to be able to 
> see the full ddi of the caller and not the First Number of the E1.
> 
> Thanks a lot
> Anthony/
> /
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip