[cisco-voip] CUPS 6.0 and UCCM 6.1

[Bill Talley]

His situation specifically referenced not having a desk phone.  You need a UPC device to use it as a softphone.  

My experience is that you will also have a tftp error if you do not have a UPC device, but it doesn't appear to be a requirement if not using softphone and doesn't appear to be service affecting.

In response to your question about using the GAL, I don't believe it can be done with Outlook 2003, however, I not sure about Outlook 2007.

*** Sent from a mobile device with very tiny keys.  Please excuse my typos. ***


-----Original Message-----
From: "Voice Noob" <voicenoob at gmail.com>
To: "Bill Talley" <billt at aos5.com>
Cc: "Nick" <csvoip at googlemail.com>; "cisco-voip at puck.nether.net" <cisco-voip at puck.nether.net>; "Motivator77 at gmx.de" <Motivator77 at gmx.de>; "Matt Slaga (US)" <Matt.Slaga at us.didata.com>
Sent: 02/20/08 8:20 AM

So you have to configure a UPC(USERNAME) for each user even if you are not
going to use softphone or IP communicator?

On Wed, Feb 20, 2008 at 6:34 AM, Bill Talley <billt at aos5.com> wrote:

> Have you configured a Personal Communicator device type in Call Manager?
>  The device name must be UPC{USERNAME} and must match the username exactly,
> and be in all caps.
>
> For me, the RTMT has been an invaluable tool when troubleshooting
> authentication errors, tftp issues, etc with CUPS/CUPC.
>
>
>
> *** Sent from a mobile device with very tiny keys.  Please excuse my
> typos. ***
>
>
> -----Original Message-----
> From: "Nick" <csvoip at googlemail.com>
> To: "Voice Noob" <voicenoob at gmail.com>
> Cc: "Bill Talley" <billt at aos5.com>; "cisco-voip at puck.nether.net" <
> cisco-voip at puck.nether.net>; "Motivator77 at gmx.de" <Motivator77 at gmx.de>;
> "Matt Slaga (US)" <Matt.Slaga at us.didata.com>
> Sent: 02/20/08 4:52 AM
> Subject: Re: [cisco-voip] CUPS 6.0 and UCCM 6.1
>
> I believe you have to set up the 

CONFIDENTIALITY NOTICE: This electronic mail transmission (including any accompanying attachments) is intended solely for its authorized recipient(s), and may contain confidential and/or legally privileged information. If you are not an intended recipient, or responsible for delivering some or all of this transmission to an intended recipient, be aware that any review, copying, printing, distribution, use or disclosure of the contents of this message is strictly prohibited. If you have received this electronic mail message in error, please delete it from your system without copying it, and contact sender immediately by Reply e-mail, or by calling 913-307-2300, so that our address records can be corrected.

 

Although this e-mail and any attachments are believed to be free of any virus or other defect that might negatively affect any computer system into which it is received and opened, it is the responsibility of the recipient to ensure that it is virus free and no responsibility is accepted by the sender for any loss or damage arising in any way in the event that such a virus or defect exists.