[cisco-voip] Polycom IP 4000 and CME 4.1

[Paul Choi]

If it is a SIP phone, you might be able to setup some
parameters for the phone to register with CME 4.1

--- Jonathan Charles <jonvoip at gmail.com> wrote:

> Not sure of the model, but if it just a POTS, then
> get an ATA
> 
> 
> 
> Jonathan
> 
> On Fri, Feb 22, 2008 at 4:57 PM, Keel, Donald
> <Donald.Keel at metrix1.com> wrote:
> >
> >
> >
> >
> > So I have a boss that when a buys Item all the
> time with out asking if they
> > will work. So I have 7 polycom IP 4000 SIP phone
> that I need to get working
> > on a CME 4.1 2800 router. How do I setup the
> router to register the phones?
> >
> >
> >
> >
> >
> > Thanks
> >
> >
> >
> >
> >
> > Donald
> > _______________________________________________
> >  cisco-voip mailing list
> >  cisco-voip at puck.nether.net
> > 
> https://puck.nether.net/mailman/listinfo/cisco-voip
> >
> >
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
> 



      ____________________________________________________________________________________
Never miss a thing.  Make Yahoo your home page. 
http://www.yahoo.com/r/hs