[cisco-voip] Mixing MGCP and SCCP on a gateway

[Kalle Tetto]

Hi,

yes just use the stcapp command in global mode und then use the CCM to 
configure the SCCP Ports, it will then create the dialpeers for you. You 
do not need to create them yourself.

Cheers

Paul Choi schrieb:
> Jonathan,
> 
> This is just a guess so don't take it as gospel but I
> think you have to have stcapp running as well as sccp
> and mgcp. You then have to have dial-peers that refer
> to the FXS ports using application stcapp and
> similarly have any dial-peers referring to the PRI
> voice-port as application mgcpapp. Also for advanced
> features on the FXS ports, I think you have to use the
> "feature-codes" command.
> 
> Paul
> 
> --- Jonathan Charles <jonvoip at gmail.com> wrote:
> 
>> OK, but how do you associate an FXS port with SCCP
>> so I can get
>> advanced features (transfer, etc...) while the PRI
>> is MGCP?
>>
>>
>>
>> Jonathan
>>
>> On Sun, Feb 24, 2008 at 8:55 AM, Kalle Tetto
>> <tettokalle at hotmail.com> wrote:
>>> Hi Jonathan,
>>>
>>>  I'm sorry, I have not one with FXS and PRI only
>> with MGCP PRI and SCCP
>>>  Conferencing, but just configure MGCP as usual
>> and then SCCP as usual.
>>>  They do not interfere each other. If it would not
>> work you could not use
>>>  any hardware transcoding on the same box, because
>> it always uses SCCP.
>>>  Hope this helps, if you have further questions,
>> let me know!
>>>  MGCP Part
>>>
>>>  controller E1 0/0/0
>>>   pri-group timeslots 1-31 service mgcp
>>>  !
>>>  controller E1 0/0/1
>>>   pri-group timeslots 1-31 service mgcp
>>>  !
>>>  controller E1 0/1/0
>>>   pri-group timeslots 1-31 service mgcp
>>>  !
>>>  controller E1 0/1/1
>>>   pri-group timeslots 1-31 service mgcp
>>>  !
>>>  ccm-manager fallback-mgcp
>>>  ccm-manager redundant-host 172.31.1.1
>>>  ccm-manager mgcp
>>>  ccm-manager music-on-hold
>>>  ccm-manager config server 172.31.1.1
>>>  ccm-manager config
>>>  !
>>>  mgcp
>>>  mgcp call-agent 172.31.1.2 2427 service-type mgcp
>> version 0.1
>>>  mgcp dtmf-relay voip codec all mode out-of-band
>>>  mgcp rtp unreachable timeout 1000 action notify
>>>  mgcp modem passthrough voip mode nse
>>>  mgcp package-capability rtp-package
>>>  no mgcp package-capability res-package
>>>  mgcp package-capability sst-package
>>>  no mgcp package-capability fxr-package
>>>  mgcp package-capability pre-package
>>>  no mgcp timer receive-rtcp
>>>  mgcp sdp simple
>>>  mgcp rtp payload-type g726r16 static
>>>  mgcp bind control source-interface Loopback1
>>>  mgcp bind media source-interface Loopback1
>>>  !
>>>  mgcp profile default
>>>  !
>>>  SCCP Part
>>>
>>>  sccp local GigabitEthernet0/0.1
>>>  sccp ccm 172.31.1.1 identifier 1 priority 4
>> version 4.0
>>>  sccp ccm 172.31.1.2 identifier 2 priority 3
>> version 4.0
>>>  sccp
>>>  !
>>>  sccp ccm group 1
>>>   associate ccm 2 priority 3
>>>   associate ccm 1 priority 4
>>>   associate profile 2 register CONF-PUK-FL-RO1
>>>   associate profile 1 register MTP-PUK-FL-ROU1
>>>  !
>>>  dspfarm profile 1 transcode
>>>   codec g711ulaw
>>>   codec g711alaw
>>>   codec g729ar8
>>>   codec g729abr8
>>>   codec gsmfr
>>>   codec g729br8
>>>   associate application SCCP
>>>   shutdown
>>>  !
>>>  dspfarm profile 2 conference
>>>   codec g711ulaw
>>>   codec g711alaw
>>>   codec g729ar8
>>>   codec g729abr8
>>>   codec g729r8
>>>   codec g729br8
>>>   maximum sessions 10
>>>   associate application SCCP
>>>  !
>>>
>>>
>>>  Jonathan Charles schrieb:
>>>
>>>
>>>> Do you have a config example, FXS using SCCP and
>> PRI using MGCP?
>>>  >
>>>  >
>>>  >
>>>  > Jonathan
>>>  >
>>>  > On Sat, Feb 23, 2008 at 3:16 AM, Kalle Tetto
>> <tettokalle at hotmail.com> wrote:
>>>  >> Sure,
>>>  >>
>>>  >>  no problem at all,
>>>  >>
>>>  >>  you can even use mgcp, sccp and h323 on one
>> gateway.
>>>  >>
>>>  >>  Cheers
>>>  >>
>>>  >>  Jonathan Charles schrieb:
>>>  >>
>>>  >>
>>>  >>> Just curious if this can even be done... Have
>> a PRI and and FXS/DID
>>>  >>  > card, want SCCP features on the FXS and
>> MGCP for the PRI (could go
>>>  >>  > with H323 for the PRI if need be...)
>>>  >>  >
>>>  >>  > Can this be done?
>>>  >>  >
>>>  >>  >
>>>  >>  >
>>>  >>  > Jonathan
>>>  >>
>>>  >> 
>> _______________________________________________
>>>  >>  cisco-voip mailing list
>>>  >>  cisco-voip at puck.nether.net
>>>  >> 
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>  >>
>>>
>>>  _______________________________________________
>>>  cisco-voip mailing list
>>>  cisco-voip at puck.nether.net
>>>
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
> 
> 
> 
>       ____________________________________________________________________________________
> Never miss a thing.  Make Yahoo your home page. 
> http://www.yahoo.com/r/hs