[cisco-voip] 4503 refuses poe in gi eth 2/9 - 12

[Matthew Saskin]

How much power is being drawn off the blade?  As I recall some of the 
PoE blades for the 65xx (for example) can't provide full class III PoE 
on all 48 ports.

-matt

Anthony Kouloglou wrote:
> Hi, i have an CME installation with a 4503 switch.
> Besides the SupEngine Module, we have one 48gbps poe module in slot 2.
> All ports of this module work fine supplying poe to ipphones except 
> for 4 ports!! gieth 2/9 - 2/12!!
> I have the module replaced but the same thing is happening!!
> There are 12 ports free that work! Only those 4 ports do not 
> work!!They do work as ethernet ports.
> Could it be IOS problem? A board problem?
>
> Thanks
> Anthony
> ------------------------------------------------------------------------
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>