[cisco-voip] PRI fails but ccm status is still registered

[Gareth S. Cafirma]

Thanks Wes, now the problem is since its still registered, any call  
that comes in to this pri will busy out and calls will not go to the  
next PRI. Any solution or workaround for this one?

On Feb 28, 2008, at 1:56 PM, Wes Sisk <wsisk at cisco.com> wrote:

> For 6608 i believe it is going to stay registered, just the d- 
> channel will be down/OOS.  Use perfmon or RTMT counters to check  
> that condition.
>
> For IOS MGCP gateways performing d-channel backhaul the gateway will  
> show registered even if the d-ch is down. However the specific  
> endpoint will only show registered if the d-ch is up.
>
> /Wes
>
> Gareth S. Cafirma wrote:
>> Its on a 6608 blade and the other end is rightfax server. Server  
>> shuts  down but pri still shows as registered in ccm. Anyone  
>> encountered this  before?  Ccm 4.1(3)es122.1
>>
>> Thank you.
>> Gareth
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>