[cisco-voip] Cisco Dialplans China to the US

[Joel P]

If im understanding your request correctly you could just build some route
patterns pointing to the far-end gateways.

Then at each GW pass the call out your PSTN.

Not sure if youre using MGCP or H323 GW's, but it can be accomplished either
way.

Do you have ICT's for the calling between sites in your Cloud?

 

Joel P

 

  _____  

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Todd Simons
Sent: Thursday, February 28, 2008 9:25 PM
To: Todd Simons; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Cisco Dialplans China to the US

 

All-

Clarification... we already have an established VoIP cloud for 4-digit
dialing.   We want to send public calling through the VoIP cloud too.
...for example, in our NJ office, if we dial a China telephone call, we want
it to go through OUR VoIP Cloud to china, then out to the PSTN from our
Shanghai PBX, or in our Shanghai office if they call a NJ phone number, the
calls get routed through the VoIP cloud to our NJ PBX, which will put the
call out to the PSTN.

 

~Todd

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Todd Simons
Sent: Thursday, February 28, 2008 9:07 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Cisco Dialplans China to the US

 

Hello all

I'm starting a project to implement least cost routing between our Shanghai,
Boston, and NJ offices.  Just wondering if anyone has a dialplan
(dial-peers, translations, etc) that they can share for the PSTN call
routing, or if anyone has seen any good resources on the Web for this.

 

Many Thanks!

~Todd


## Scanned by Delphi Technology, Inc. ##


## Scanned by Delphi Technology, Inc. ##

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080229/d3e2b0c6/attachment-0001.html