[cisco-voip] Unified Mobility - CSS Question

[Justin Steinberg]

For Mobility Conect, CM uses the 'rerouting CSS' on the user's remote
destination profile to extend the mobility call to the remote destination
(aka cell phone).

So create a new CSS and assign that to the 'rerouting CSS' on the user's
remote destination profile.  Then create a new route pattern in a new
partition that exists in the new CSS that you just created.  Prefix a 0 in
the route pattern.  You could alternatively use application dial rules to
achieve similiar results.

This is assuming that your Telco wants to see a 0 in front, I'm not familiar
with the dialplan for your country so I may be misunderstanding your
question - but seeing the 0 infront of the numbers in your SIG, I think this
will work.

Justin


On Fri, Feb 29, 2008 at 2:57 AM, Robin Inderberg <
robin.inderberg at candidator.se> wrote:

> Hi,
>
> No one who has a clue regarding this one?
>
> Thank you in advance,
>
>
>
> Med vänliga hälsningar
>
> Robin Inderberg
> robin.inderberg at candidator.se
> _____________________________________________
> Telefon:   0322-67 10 00    www.candidator.se
> Direkt:    0322-67 10 19    Candidator AB
> Mobil:     0733-47 10 19    Kristineholmsvägen 14C
> Fax:       0322-67 10 99    441 39  ALINGSÅS
> ¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯
>
>
> -----Original Message-----
> From: cisco-voip-bounces at puck.nether.net [mailto:
> cisco-voip-bounces at puck.nether.net] On Behalf Of Robin Inderberg
> Sent: den 28 februari 2008 13:27
> To: cisco-voip at puck.nether.net
> Subject: [cisco-voip] Unified Mobility - CSS Question
>
> Hi,
>
> I have a question regarding the Mobility Feature in CUCM6.1(1a).
>
> We have a customer where I should implement Mobility on, the customer has
> to dial 0 to reach the external line.
>
> But they don't want this to apply on their Cell Phones, Is it possible to
> solve this with a specific CSS on the RDP?
> As far as I know, the CCM checks the shared line for what CSS they should
> use for outbound dialing?
>
> One more question, when I am making a call from my Cell Phone, it seems
> that the CCM ignores the external phone number mask configured on the shared
> line connected to the RDP.
> The problem is that our Telcom need to have all digits, not only the
> Directory Number.
>
> And where do I find the timer that puts the call on Hold if I disconnect
> on the remote device?
>
>
> Thank you in advance,
>
>
> /Robin
> Med vänliga hälsningar
>
> Robin Inderberg
> robin.inderberg at candidator.se<mailto:robin.inderberg at candidator.se>
> _____________________________________________
> Telefon:   0322-67 10 00    www.candidator.se<http://www.candidator.se/>
> Direkt:    0322-67 10 19    Candidator AB
> Mobil:     0733-47 10 19    Kristineholmsvägen 14C
> Fax:       0322-67 10 99    441 39  ALINGSÅS
> ¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080229/0b685667/attachment.html