[cisco-voip] Blocking an extension in CME

Fri Feb 29 11:47:30 EST 2008

Guys,

I need a little help with CME.

I have to block one phone from phoning out. Now I have done this before,
but it just doesn't want to work. They use extension mobility on CME,
and I don't know if this has anything to do with it. I don't know if I'm
missing a step, but this is what I did.

voice translation-profile 1

 translate called 1

voice translation-profile Block

!

interface BRI0/2/0

 no ip address

 isdn switch-type basic-net3

 isdn point-to-point-setup

 isdn incoming-voice voice

 isdn send-alerting

 isdn sending-complete

!

dial-peer cor custom

 name Block

!

dial-peer cor list Block

 member Block

!

dial-peer voice 2999 voip

 description "Voice-mail"

 destination-pattern 2978

 session protocol sipv2

 session target ipv4:10.66.20.130

 dtmf-relay sip-notify

 codec g711ulaw

 no vad

!

dial-peer voice 6 pots

 corlist outgoing Block

 destination-pattern .T

 fax rate disable

 direct-inward-dial

 port 0/2/0

 forward-digits all

!

dial-peer voice 20 voip

 destination-pattern 2...

 session target ipv4:10.66.20.1

 incoming called-number .T

 codec g711ulaw

 no vad

!

ephone-dn  34  dual-line

 number 2929

 name Kitchen

 call-forward busy 2978

 call-forward noan 2978 timeout 15

 corlist outgoing Block

!

ephone  11

 mac-address 001B.54C9.E0AD

 after-hour exempt

 type 7941

 logout-profile 1

Kind Regards

Louis 

This email and all contents are subject to the following disclaimer:

"http://www.dimensiondata.com/emaildisclaimer.htm"
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080229/3b43dea8/attachment.html 