[cisco-voip] PBX with Router: Multiple trunks

[Ramiz Sardar]

 Friends,

I am currently working on voip setup. I connected a router with a pbx
through a Pri (qsig). I configure dial-peers both for voip and pots. so when
a call come to router, it matches the pots dial-peer and forward call to pbx
on specific port that i mention in dial-peer.

Now my question is if have 3 trunk with the same pbx. One way is that i
configure 3 pots dial-peer with same destination and define all 3 ports in
them. like

dial-peer voice 10 pots
destination-pattern 3...
port 1/0
dial-peer voice 20 pots
destination-pattern 3...
port 1/1
dial-peer voice 30 pots
destination-pattern 3...
port 2/0

but i believe this is not the way. Please tell me the actual way to assign
multiple ports for a dial-peer.

Best Regards
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080106/edb11f5a/attachment-0001.html