[cisco-voip] PBX with Router: Multiple trunks

Ramiz Sardar ramizchaudhary at gmail.com
Sun Jan 6 07:58:55 EST 2008


Dear Patrick,
What i studied i come to know that for E1 Pri i have to configure
trunk-group in its D channel means serial 1/0:15 etc. and then that
trunk-group into dial-peer and also an other command trunk-group-label in
it. What you think the way you told me also work ??
An example what i said you can see below link:

http://puck.nether.net/pipermail/cisco-voip/2006-August/014438.html

Best Regards

On Jan 6, 2008 5:26 PM, Ramiz Sardar <ramizchaudhary at gmail.com> wrote:

> Dear Patrick, bundle of thanks for quick response....
>
> Best Regards
>
>
> On Jan 6, 2008 3:53 PM, Patrick Diener <patrick.diener at gmail.com> wrote:
>
> > you can achieve this by assigning all voice ports to a trunk-group and
> > then configure a dial-peer to point to this trunk group:
> >
> > voice-port 1/0
> >  trunk-group mygroup 1
> > voice-port 1/1
> >  trunk-group mygroup 2
> > voice-port 2/0
> >  trunk-group mygroup 3
> >
> > dial-peer voice 10 pots
> >  destination-pattern 3...
> >   trunkgroup mygroup
> >
> > Regards Patrick
> >
> > On Jan 6, 2008 11:46 AM, Ramiz Sardar <ramizchaudhary at gmail.com> wrote:
> > >  Friends,
> > >
> > > I am currently working on voip setup. I connected a router with a pbx
> > > through a Pri (qsig). I configure dial-peers both for voip and pots.
> > so when
> > > a call come to router, it matches the pots dial-peer and forward call
> > to pbx
> > > on specific port that i mention in dial-peer.
> > >
> > > Now my question is if have 3 trunk with the same pbx. One way is that
> > i
> > > configure 3 pots dial-peer with same destination and define all 3
> > ports in
> > > them. like
> > >
> > > dial-peer voice 10 pots
> > > destination-pattern 3...
> > > port 1/0
> > > dial-peer voice 20 pots
> > > destination-pattern 3...
> > > port 1/1
> > > dial-peer voice 30 pots
> > > destination-pattern 3...
> > > port 2/0
> > >
> > > but i believe this is not the way. Please tell me the actual way to
> > assign
> > > multiple ports for a dial-peer.
> > >
> > > Best Regards
> > > _______________________________________________
> > > cisco-voip mailing list
> > > cisco-voip at puck.nether.net
> > > https://puck.nether.net/mailman/listinfo/cisco-voip
> > >
> >
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080106/33c70a49/attachment.html 


More information about the cisco-voip mailing list