[cisco-voip] install CCM4.1(3) on HP DL380G5 Server.

[Jacky Cai]

Thanks, All.

I had tried with 4.3, 4.4, 4.5. but all failed. I understand that  the
installation will update the firmware if the currently version is earlier
then expected. But if the currently version is newer then expected, it will
do nothing.
I had success installed into two other DL380G5 server in Apr 2007 with OS
version 4.4. I compared the new server with those two old server. the only
difference between them is the Array controller firmware version. So I think
the problem is this. Any advance else? Thank you.

Jacky Cai

2008/1/9, Lelio Fulgenzi <lelio at uoguelph.ca>:
>
>  What OS version are you disks? From this chart:
>
>
> http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/mcs-server-os-0711.xls
>
> For a fresh install, HP 380DL G5 only supports 2000.4.4, 2000.4.5
>
> Please confirm if this is what you have or not.
>
>
>
> --------------------------------------------------------------------------------
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> "Life expectancy would grow by leaps and bounds if green vegetables
> smelled as good as bacon."
> Doug Larson
>
>
> ----- Original Message -----
> From: Jacky Cai
> To: cisco-voip at puck.nether.net
> Sent: Tuesday, January 08, 2008 8:33 PM
> Subject: [cisco-voip] install CCM4.1(3) on HP DL380G5 Server.
>
>
> Hi All,
>
> I am working on setup a new Call Manager (Version 4.1.3) on a HP DL380G5
> Server. When Hardware detection during installation, It warning that the
> array controller firmware version is not supported. the expected version is
> 1.18 but the new server is 2.08. and the installation stopped. I found a
> v1.18 firmware from HP website and try to downgrade my server for
> sometimes, but all attempts failed, the downgrading crash the array
> controller. the array controller model is Smart Array P400.
> Do any one has any idea about this? Is there any OS version for CCM4.13can support P400 version
> 2.08 or later?  I had asked HP for an old array controller with 1.18 but
> HP said 1.18 is too old and is end of sales.
>
> Thank you.
> Jacky Cai
>
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080109/0072e427/attachment-0001.html