[cisco-voip] Sip Device help

[Matthew Saskin]

That's basically all you need to get calls to route to it provided that 
your route pattern is in a partition that is reachable from the calling 
device.

Beyond that, you need to make sure the other device is configured 
properly, that you're sending it the proper number of digits (if it 
expects any), etc....

Mike Glass wrote:
> I have a Cyberdata VoIP Paging Zone Controller 4-Port Audio Out from 
> http://www.cyberdata.net/products/voip/voip-zonecontroller.html
>  
> I have created a sip trunk with using the ip of the device, and created 
> a route pattern pointing to the Sip Trunk. What else do I need to 
> configure to use this device as a intercom device.
>  
> Thanks
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip