[cisco-voip] Sip Device help

[Ryan Ratliff]

Those look like SIP client options.  What version of CallManager are  
you using with this device?  If it's 5.x or 6.x have you tried adding  
it as a 3rd party SIP device?

-Ryan

On Jan 9, 2008, at 1:33 PM, Mike Glass wrote:


these are the only parameters on the Setup for the device.
SIP Server :   *
Remote SIP Port:  5060
Local SIP Port:   5060
SIP User ID:         ?
Authenticate ID:   ?
Authenticate Password:   ?
SIP Registration:  Yes No  ?
Unregister on Reboot:  Yes No  *
Register Expiration (minutes):   *

 >>> Matthew Saskin <matt at saskin.net> 1/9/2008 11:03 AM >>>
That's basically all you need to get calls to route to it provided that
your route pattern is in a partition that is reachable from the calling
device.

Beyond that, you need to make sure the other device is configured
properly, that you're sending it the proper number of digits (if it
expects any), etc....

Mike Glass wrote:
 > I have a Cyberdata VoIP Paging Zone Controller 4-Port Audio Out from
 > http://www.cyberdata.net/products/voip/voip-zonecontroller.html
 >
 > I have created a sip trunk with using the ip of the device, and  
created
 > a route pattern pointing to the Sip Trunk. What else do I need to
 > configure to use this device as a intercom device.
 >
 > Thanks
 >
 >
 >  
------------------------------------------------------------------------
 >
 > _______________________________________________
 > cisco-voip mailing list
 > cisco-voip at puck.nether.net
 > https://puck.nether.net/mailman/listinfo/cisco-voip

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080109/28361386/attachment.html